Finish-Cure 20 Min Epoxy 4.5 ozFINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE is best mixed in a disposable cup.
great for laminating carbon and glass fiber!This great glue for fiberglass wings or reinforce cowlsGood quality epoxy, cures fast and strong.I have used the finishing resin before and it is the best and the easyistVery nice 20 min epoxy glue! keep the stock up!Super zum laminieren ec..
Ca auf 25 celsius erwrmen, so wird er flssiger zum laminieren verglasen. Doch achtung,je wrmer desto schneller hrtet er ausexcellent product - finally used the first order of it that came internationally :) and was really keen to replace it - strong stuff which is best used where you can wait overnight for a cure, but doesn't crack or yellow at allvery happy with that product.
it's easy to use (use a kitchen scale to put equal liquide of each).
becareful using gloves because epoxy is very toxic. only wash with soap when it's on hands don't use acetone (it make epoxy go through your body) and buy a couple of cheap brushs as it's less expensive than trying to clean the one you just use to do the job.
Or put the brush in the fridge (in a bag) if you expect to use it again soon.En combinacin con la tela de fibra de vidrio refuerzas o reparas rpidamente piezas o fuselajesresina de otima qualidade para reparo em peas de fibra de vidro, depois de mistura deve ser aquecida at uns 60~70C para ativar depois s usar!