New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

GWS Brushless Outrunner 002A 1050kv 39g (2208/18T)

GWS Brushless Outrunner 002A 1050kv 39g (2208/18T)

Discontinued Product

Please continue searching for a similar product.
SKU:
GWBLM002A
WANT FREE SHIPPING? Click here to find out more!

GWS Brushless Outrunner 002A
Fully CNC machined. No casting.
Voltage: 11.1v 3 cell Lipo
No Load Current: .5A
Kv: 1050
Dimension: Shaft:3mm / Diameter 22mm
Weight: 39g / 1.38oz

For Propeller sizes and specs, click below;
http://www.gwsus.com/english/product/motor/gwblm002.htm

  • SKU GWBLM002A
  • Brand -
  • Shipping Weight 55.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 0.00
  • Max Current (A) 0.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 0.00
  • Power (W) -
  • Shaft A(mm) 3.00
  • Length B (mm) 25.00
  • Diameter C(mm) 28.00
  • Can Length D(mm) 12.00
  • Total Length E(mm) 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have been using this for about 3 months now on 350g Depron 3D model and it works great with a GWS 9050 pulling around 9.5A on a 3S/1300/20C pack, with flight times over 10minutes. Data sheet predicts around 600g thrust on this setup which is pretty good g/w at this price. Only minor niggle was that one of the shaft bearings needed replacing early on but has been fine since then.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have been using this for about 3 months now on 350g Depron 3D model and it works great with a GWS 9050 pulling around 9.5A on a 3S/1300/20C pack, with flight times over 10minutes. Data sheet predicts around 600g thrust on this setup which is pretty good g/w at this price. Only minor niggle was that one of the shaft bearings needed replacing early on but has been fine since then.

I have been using this motor on a GWS Slow Stick. Great motor runs cool and has great performance.



It also has many mounting options.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have been using this motor on a GWS Slow Stick. Great motor runs cool and has great performance.



It also has many mounting options.

Muy bueno, su ligero peso ha convertido mi hidrofoam en un bala, lo he utilizado con servos de 4 gr.

En Espaa este motor cuesta 3 veces ms.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Muy bueno, su ligero peso ha convertido mi hidrofoam en un bala, lo he utilizado con servos de 4 gr.

En Espaa este motor cuesta 3 veces ms.

Buen motor, con un set de accesorios muy completo. Cambio de orientacin del eje sencilla. En Espaa en 15 dias.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buen motor, con un set de accesorios muy completo. Cambio de orientacin del eje sencilla. En Espaa en 15 dias.

excellent moteur, cpompact avc des performance tonnante, mon sur un troll en 3S il grimpe n'en plus finir

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent moteur, cpompact avc des performance tonnante, mon sur un troll en 3S il grimpe n'en plus finir

HAve been using one for a couple of months with no problem. Runs great on 2s1p and GWS 1047 props. Current draw is ~9A, estimated thrust is 420g. No frills motor with necessary firewall mount and prop saver included. GWS also has a plastic/alu stick mount for their range of outrunners now.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

HAve been using one for a couple of months with no problem. Runs great on 2s1p and GWS 1047 props. Current draw is ~9A, estimated thrust is 420g. No frills motor with necessary firewall mount and prop saver included. GWS also has a plastic/alu stick mount for their range of outrunners now.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!