New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

GWS EP Propeller (RD-1365 330x165mm)

GWS EP Propeller (RD-1365 330x165mm)

Discontinued Product

Please continue searching for a similar product.
SKU:
GWS-prop-RD-1365
WANT FREE SHIPPING? Click here to find out more!

All GWS EP Propellers Stocked!
GWS EP Propeller (RD-1365 330x165mm)
Colours vary. Not always orange



DD:Direct Drive (fast spinning) -Straight Edge
RD:Reduction Drive (Slow Fly, Outrunner or Gearbox) - Curved Edge
  • SKU GWS-prop-RD-1365
  • Brand GWS
  • Shipping Weight 125.0000
  • Packaging Length 0.00
  • Packaging Width 0.00
  • Packaging Height 0.00
  • Propeller Diameter X(Inch) 13.00
  • Propeller Pitch Y(Inch) 6.50
  • Rotation CW
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Quite agood prop. i use it with c4250 kv600 after widening the hole abit so it can screw on . works good at 5s but 6s or higher kv will be to much for the prop and it will start viberating eventualy will brake off. but gives 500w easely i think thrust of 1750g if i remember good. great for multycopter because its thin it reacts fast and safer for motor shaft and user. great little prop

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite agood prop. i use it with c4250 kv600 after widening the hole abit so it can screw on . works good at 5s but 6s or higher kv will be to much for the prop and it will start viberating eventualy will brake off. but gives 500w easely i think thrust of 1750g if i remember good. great for multycopter because its thin it reacts fast and safer for motor shaft and user. great little prop

very good prop if you have the right gearbox. comes in 6 pack very powerful.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good prop if you have the right gearbox. comes in 6 pack very powerful.

Boa helice para ser usada com reducao.



Nao da para usar em motores direct drive (sem recucao) por ser mole demais.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Boa helice para ser usada com reducao.



Nao da para usar em motores direct drive (sem recucao) por ser mole demais.

Bought these for the use in a 1,5 kg scratchbuilt 3d foamy, not sure if they would work with a Turnigy 35-48 1100 kv. With a little bit of drilling(from 3 to 6mm) & grinding, they actually work very well ~ 700w on 4s. The core/base is very thin though, & the blades are soft - compared to the much stiffer APC, JXF, JM etc props. Thus, if you bump in to something - these wont make the alu prop shafts bend - so easily...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these for the use in a 1,5 kg scratchbuilt 3d foamy, not sure if they would work with a Turnigy 35-48 1100 kv. With a little bit of drilling(from 3 to 6mm) & grinding, they actually work very well ~ 700w on 4s. The core/base is very thin though, & the blades are soft - compared to the much stiffer APC, JXF, JM etc props. Thus, if you bump in to something - these wont make the alu prop shafts bend - so easily...

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking