Simple, easy to use charger with inbuilt cell count detection as well as automatic cut-off when the battery is charged.
With a maximum output of 1Amp, this charger is suitable for smaller two (7.4v) and three (11.1v) cell Lipoly batteries; larger batteries can be charged, but please be aware that this may take considerably longer!
The charger comes with balance leads and adapters, and will suit hexTronik batteries.
LED Light Indicator
Input Alligator Battery Clips Cable
Output End Short-Circuit Protection
CE & RoHS Ready
Auto Detection & Auto Cutoff
Monitor Each Li-PO Cell
For Li-PO Battery: 7.4 & 11.1 V
Palm Size: 102x54x28 mm
Adjustable Current: 0 ~1000mAH
DC Input: 10 ~ 15 V 18 Watt.
great little charger, works perfect for out in the field, only thing i dont like is how bright the leds are and the squealling noise it lets out, also i dont think my leds work properly.. other than that its great hahaGreat charger for it's price. But it does not balances each cell. It only charges trough balance plug, and when one of cells reaches maximum of voltage, charger cuts off carging.
To avoid disbalance your pack, set output power to 1 (100mA) and let it charge once again.
Numbers or regulator means multiplier by 100mA (from 1 to 10, 100-1000mA).
Anyway, it's a good choise.Very simple. Great for newbies. I charge at home so it was all about the wall adapter. When the light goes out...your battery is charged. Charges 2 and 3 cell batteries. Can't beat the price.Great little charger to have in the fieldkit. Price is very right, and charges a 2200mAH pack in about 2 Hours. I place the pack on my DNPower balancer to ensure it's complete, and usually is.
Only complaints, the LED's are very VERY bright, don't look at them. And, emits a high pitch squeal while charging.