Become a Supplier Blog New Items

Total Price


Cart 0 Cart 0 Loading...

H-King Hummer Xtreme 3D EPP Aerobatic Profile Plane (Kit) 1000mm (39.4")

Generating Links

H-King Hummer Xtreme 3D EPP Aerobatic Profile Plane (Kit) 1000mm (39.4")


Now save save $0.00 $0.00

Already Purchased Discontinued Product

Please continue searching for a similar product.
want FREE shipping? Click here to find out more!

The H-King Hummer EPP 3D is a high-performance profile foamy that is sure to please. With its airfoiled wing, huge control surfaces, independent aileron servos and lightweight construction, this model is ready to perform extreme aerobatics. Hovering, knife edge, harriers, flat spins and more, this plane can handle it all!


The Hummer's ultra-durable EPP construction and carbon fiber reinforcement ensures that it can really take a beating. This is ideal for pilots looking to practice 3D maneuvers without the fear of destroying an expensive balsa model.


The Hummer EPP arrives in kit form, so you will need to add your own electronics. The build is straightforward. 


Simply add your own 1000KV brushless motor, 1047 slow fly prop, 20A ESC, 4 x 9g servos, 4ch radio system, 3S lipo battery and you are ready to fly!


• Ultra-durable EPP construction with carbon fiber reinforcement
• Able to perform extreme aerobatics. Hovering, knife edge, barriers, flat spins, and more, this plane can do it all
• Vivid colors and sharp graphic designs
• Comes with an extra motor mount for quick repairs to have you back in the air in no time


Wingspan: 1000mm
Length: 950mm
Flying Weight: 450~500g


4ch transmitter/receiver
2212 / 2213 1000KV brushless motor
20A brushless ESC with BEC
4 x 9g servos
1047 slow fly propeller
3S 11.1V 850~1300mAh lipo battery


Note: Manual can be found in the "Files" tab above.

  • IC/2:Elec Electric
  • Wingspan(mm) 1000.00
  • Length(mm) 950.00
  • Hummer FPV take off
  • Hummer FPV landing
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Jim | Verified Buyer

  • Overall
  • Quality
  • Value

Lots of fun

Jun 12, 2021

With a 3S 1500 50C, this plane hovers at half throttle.
Great, relaxing fun.
Glued on a piece of a bamboo skewer on the bottom of the rear skid for protection.
Excellent value.

Stewart | Verified Buyer

  • Overall
  • Quality
  • Value

Pretty good 3D plane for the price, do some mods to improve it

Mar 01, 2021

First of all, here's what I loaded it with ( I wish more people would post this)
Turnigy aerodrive D2830/11 1000kv
10x4.7 slowfly prop on a collet style spinner
HK 30A UBEC with 5v/3A BEC
Zippy 25C 1000mAh 3s Lipo
4x HXT900 9g servos
OrangeRX GR400F FASST Receiver and a Futaba 6EX TX
Used BSI foam-cure foam glue for 90% of the assembly and hot-glue for some reinforcements
With my setup, it will do vertical climb-outs at full throttle, and hover at about 2/3 throttle. I suspect going up to a 4s would improve performance. Flies straight where you point it, capable of tight snappy rolls, requires experience if you give it high rate throws. With low rate throws it's totally controllable, but keep in mind that this ain't a trainer and it won't right itself after a bank - it goes exactly where you point it and no where else.
Build tips:
DONT USE THE LANDING GEAR! They won't work. Flimsy as heck. Just belly land it.
Throw out the paper hinges and use some nylon pinned hinges. Much more accurate
control movements.
Most important thing for accurate flight - the included carbon fiber rods are not great. I highly highly recommend beefing up the wing spars, here's how I did that: take some 1/16" thick balsa strips, I think about 1/4" wide. Widen and deepen the carbon fiber rod slot slightly on one side, I did the top side. Be careful not to cut the wing in half though, it didn't need much trimming for the balsa to fit. After the two wing halves are joined, insert this balsa strip into your slot tacky with BSI foam-cure. You now have a much stiffer wing that will handle G-loading much better.
Supposedly if you don't stiffen up the wing similar to this the wings will flop in flight, especially in tight pull-ups. I haven't had an issue with the balsa strip, it's pretty stiff. I also still had space to insert one of the carbon rods in the bottom side, again wet with glue.
That's about it. Probably the cheapest most usable foamy you can get. But you do need to help it out a bit as described to make it a nice plane.

Team | Verified Buyer

  • Overall
  • Quality
  • Value

Fun, Fun. Fun

Oct 06, 2020

I fly this as if I've stole it, perfect plane for putting a a smile on your face, I have more fun with this then any other plane in my fleet, wouldn't be without one

waniak | Verified Buyer

  • Overall
  • Quality
  • Value

dobry jakościowo

Aug 22, 2020


no nickname | Verified Buyer

  • Overall
  • Quality
  • Value

nice plane

Jul 19, 2020

verry nice

Kunty | Verified Buyer

  • Overall
  • Quality
  • Value


Jul 19, 2020

All the components necessary for the construction of the kit are in the box. The flight performance is very good. I recommend the kit for all pilots

Kunty | Verified Buyer

  • Overall
  • Quality
  • Value

Nice kit

Jul 19, 2020

Nice kit with every component necessary for building. Thée flying performances are very good. I recommande this nit for any pilote

Ahff | Verified Buyer

  • Overall
  • Quality
  • Value

Lots of fun

Jul 18, 2020

A bargain

Ron | Verified Buyer

  • Overall
  • Quality
  • Value

Good value for the money.Easy build and it is a great flyer.

Jul 04, 2020

Good value for the money. Easy build and a great flyer.

Shaun | Verified Buyer

  • Overall
  • Quality
  • Value

Prop/motor warning

Jun 01, 2020

The recommended prop/motor combination for this model are a 1000Kv motor driving a 10x4.7 slow fly prop with a 3S battery.
The motor/battery combination will give approx 10000rpm, however APC slow fly props are only rated to 65000/prop diameter so for a 10 inch prop that's 6500rpm.
I have been flying this combination for a few months now and recently checked the prop to find stress cracks near the hub. On further investigation (i.e gentle flexing) one of the blades bent just like Uri Geller's spoon and dropped off! It couldn't have been more than a few minutes away from dropping off in flight with associated vibration/destruction.I have now fitted a standard 10x5 APC E prop which seems fine and is rated to 15000rpm for a 10 inch prop so hopefully no more problems!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Hummer Manual.pdf Download [507]
hummer_manual_italiano.pdf Download [691]
Hummer UP Download [4]
Hummer BOTTOM Download [1]
Hummer FPV Download [818]
Hummer CAT Download [679]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!