New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

H-King Orca 280mm FPV Ready Quad Copter Frame

H-King Orca 280mm FPV Ready Quad Copter Frame

Discontinued Product

Please continue searching for a similar product.
SKU:
9111000002-0
WANT FREE SHIPPING? Click here to find out more!

The Orca Has an unusual upper support that allows easier mounting and access to all the goodies installed. The frame has a unibody construction making it very strong for its size and materials used. The frame is all 1.6mm FR4 with boxed arms and center plates. The center plate spacing lets equipment such as esc easily fit for a clean install. There are 2 vibration isolated mounts for your gear and defined camera and battery mounting positions. The Awesome looks, strength, and features make this a killer whale of a deal.

Features:
• Two vibration isolation systems
• Unibody construction
• lots of space for gear installation
• 1.6mm FR4

Specs:
Wheelbase: 280mm
Weight: 163g

Required:
4 x Motors 1506~2208
1 x Battery 800~1300mah 7.4~11.1V (2 or 3 cells Lipoly)
4 x Propellers up to 6in
4 x ESC’s 7~12A
1 x multi-rotor Flight controller
4ch radio (6ch recommended for FPV and FC use)
FPV gear (optional) 

  • SKU 9111000002-0
  • Brand H-King
  • Capacity (mAh) -
  • Shipping Weight 252.0000
  • Packaging Length 220.00
  • Packaging Width 25.00
  • Packaging Height 95.00
  • HK Orca and Smack Quad Frame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice frame kit but too weak.
Advantages :
- Aesthetics
- Electronic protection
- Complete frame kit
- Good price

Drawbacks :
- Weight
- Fragility: carbon is far too fine for arms
- No spare parts

The trick to solidify the arms is to put a flat washer on the furthest's arms screw. It will spread the impact of a crash.
So it is "beautiful" but technically, HK needs to redisgn!!

Have fun with it ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice frame kit but too weak.
Advantages :
- Aesthetics
- Electronic protection
- Complete frame kit
- Good price

Drawbacks :
- Weight
- Fragility: carbon is far too fine for arms
- No spare parts

The trick to solidify the arms is to put a flat washer on the furthest's arms screw. It will spread the impact of a crash.
So it is "beautiful" but technically, HK needs to redisgn!!

Have fun with it ;)

Very good quality build and I enjoyed every minute of it. Make sure you Loctite everything tho and its got aluminium standoffs everywhere. A little fiddly when assembling but worth it! I like the fact that the chassis is the roll cage to protect your internals too. Gopro mounting is very difficult, I was a bit worried that the battery mounting up high on the built in tray would make it top heavy but its all good :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good quality build and I enjoyed every minute of it. Make sure you Loctite everything tho and its got aluminium standoffs everywhere. A little fiddly when assembling but worth it! I like the fact that the chassis is the roll cage to protect your internals too. Gopro mounting is very difficult, I was a bit worried that the battery mounting up high on the built in tray would make it top heavy but its all good :)

I was really excited when i saw this frame and keen for it to arrive. Opening the box and no instructions????
If i had no experience this would have been very hard to build. The arm set up looked good till i started trying to fit them. A "i wish i had three hands" build. Once completed i struggled to fit the electronics in. I like to fit my Acro Naze in the 3D printed boxes, which does not fit if you put the side protectors on. I ended up supergluing mine to them.
Will it stand up to multiple crashes?? Time will tell?
I have buily many many helicopters and quads, and this by far is the Worst build i have ever done. Would not recommend it to anyone:(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was really excited when i saw this frame and keen for it to arrive. Opening the box and no instructions????
If i had no experience this would have been very hard to build. The arm set up looked good till i started trying to fit them. A "i wish i had three hands" build. Once completed i struggled to fit the electronics in. I like to fit my Acro Naze in the 3D printed boxes, which does not fit if you put the side protectors on. I ended up supergluing mine to them.
Will it stand up to multiple crashes?? Time will tell?
I have buily many many helicopters and quads, and this by far is the Worst build i have ever done. Would not recommend it to anyone:(

just built it, and have noticed it is not the same as the video. no camera mount as video ,so its not going to be as tidy as it could have been. does not seem as strong as it could be. . one good crash and it will be all over . i was looking forward to this but not sure now . hope im wrong. but i dont think i will be

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

just built it, and have noticed it is not the same as the video. no camera mount as video ,so its not going to be as tidy as it could have been. does not seem as strong as it could be. . one good crash and it will be all over . i was looking forward to this but not sure now . hope im wrong. but i dont think i will be

Overall its a nice frame. Much more durable then I would have thought based on material and thickness. The anti-vibe plates are mostly useless. Originally mounted my FC on the middle plates but kept getting oscillations and it was impossible to tune. After some research, I decided to mount it direct to frame and the oscillations are gone. The other plate(camera plate?) Is on the wrong side for a camera. The front should clearly be the thicker, more durable end of the frame which is opposite of that plate. Took them both off and rigged up a mount for the camera in the front.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall its a nice frame. Much more durable then I would have thought based on material and thickness. The anti-vibe plates are mostly useless. Originally mounted my FC on the middle plates but kept getting oscillations and it was impossible to tune. After some research, I decided to mount it direct to frame and the oscillations are gone. The other plate(camera plate?) Is on the wrong side for a camera. The front should clearly be the thicker, more durable end of the frame which is opposite of that plate. Took them both off and rigged up a mount for the camera in the front.

Really nice looking frame, I wish it was like the one shown in the video but is quite different, this one has an anti vibration plate in the back???, although depending on pilot preferences it can be set backwards and install the camera on that plate, either direction set looks good though. Assembling is not as easy as other frames but easy to figure out despite the lack of manual. Flight test was phenomenal, it is extremely stable and flies just like is on rails, using DYS 1806 2300kv motors, multistar 10 amps esc, 6x3 gem fan props I got outstanding 13 minutes of flight times with 3s 2200mah lipo. Overall really happy, nice design, amazing performance, this is a must have mini quadcopter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really nice looking frame, I wish it was like the one shown in the video but is quite different, this one has an anti vibration plate in the back???, although depending on pilot preferences it can be set backwards and install the camera on that plate, either direction set looks good though. Assembling is not as easy as other frames but easy to figure out despite the lack of manual. Flight test was phenomenal, it is extremely stable and flies just like is on rails, using DYS 1806 2300kv motors, multistar 10 amps esc, 6x3 gem fan props I got outstanding 13 minutes of flight times with 3s 2200mah lipo. Overall really happy, nice design, amazing performance, this is a must have mini quadcopter.

Customer files
No File Name Download [31]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save