Display : All categories 7 Power Systems 839 Electric Motors 340 Brushless Motors 241

hexTronik DT700 Brushless Outrunner 700kv

hexTronik DT700 Brushless Outrunner 700kv

Price:

Now save save $0.00 $0.00

$14.58

Already Purchased Discontinued Product

Please continue searching for a similar product.

1 year warranty

SKU:

DT700

want FREE shipping? Click here to find out more!

Share this product & Earn 73 points ($0.73) [ ? ]

Product Description

Looks can be deceiving. This outrunner is around twice the size of a towerpro bell motor, and swings a much larger prop. Its the motor used on some of Art-techs new plane kits, which is testiment to its durability, ease of use and quality.
The DT700 will swing an 11x4.7 SF prop nicely, to produce more than 900g of thrust.
Its great for larger GWS foamies or parkfly planes.

Spec.
Required Voltage: 11.1v
Suggested Battery Capacity: 1300mAh +
Suggested Prop: 10x4.7, 11x3.8 or 11x4.7
Max current draw: 13A (with 11x4.7 prop)
Max thrust: 900g+
No Load Current: 1.2A
Shaft: 4M (perfectly suited to Towerpor/GWS SF Slow Fly props)
Weight: 78g
Diameter: 41mm
Overall length: 77mm
Kv: 700rpm/v
Comes with mount as shown in Image

Test Report.
We used this outrunner to power the an Art-tech Pitts. Run with a 1300mAh 3S1P 20C pack, 18A BESC and 1147 GWS/Towerpro prop, the Art-tech pitts ran nicely. Excellent climb rate, though not hoverable, and with 13minute flight times or more, we were very impressed.
A very efficient outrunner for slower flying models of up to .15 size.

Product Specifications

Kv(rpm/v) 700.00
Max Current (Motor) (A) 13.00
Resistance (mh) 0.09
Max Voltage (V) 13.00
Power (W) 270.00
Shaft A(mm) 4.00
Length B (mm) 38.00
Can Diameter C(mm) 40.00
Can Length D(mm) 10.00
Total Length E(mm) 78.00

Dimension Diagram Guide

Videos

Upload video

Only registered users can upload video. Please, log in or register

Discuss 0

Topics

Sort by

Most Recent Topics

Post a new Topic

Reviews

Only registered users can write reviews. Please, sign in or sign up

shop5 | Verified Buyer

Overall
Quality
Value

bien adapte

Apr 22, 2020

ce moteur fonctionne très bien sur le B17 V2 mais le rend un peut lent

repapoko | Verified Buyer

Overall
Quality
Value

muy mala calidad

Nov 03, 2019

mala terminacion..lambre ce conexion muy rgido y fragil. antes colocar hay que cambiar ese alambre

Riotnuts | Verified Buyer

Overall
Quality
Value

Customer Rated

May 14, 2015

very powerful bell motor, i ts almost equal in performance with a 35xx motor 920k, except that its half the price , also it can handle 4s easily, if 10-12`prop-=25amb esc
if 13 prop= 30 a esc

Wilder | Verified Buyer

Overall
Quality
Value

Customer Rated

Apr 30, 2015

Using this motor with a 30 Amp car ESC for an ROV project. So far preliminary tests are working nicely. It produces quite amount of thrust with my 57mm boat props, while submerged. the only problem I've had is that the set screws in the base seem to strip fairly easily, and I've had to drill an indent to keep the control wires from coming loos and flopping around.

| Verified Buyer

Overall
Quality
Value

Certified Buyer Rated

Jan 22, 2015

It's a good product. It works as it should be.

Two thumbs up. I would like to recommend it to all user.

andrew | Verified Buyer

Overall
Quality
Value

Customer Rated

Oct 02, 2014

cheap work well and very efficient. the one and only down side is I have had 2 out of 4 have magnets come loose. I hope hk can in prove on their quality of products.

b-con | Verified Buyer

Overall
Quality
Value

Customer Rated

Apr 08, 2014

These motors are ok for scratchbuild multirotors, but you will soon find they are a bit sluggish. You need to epoxy the wires which I am sure has been stated, but I ruined two motors before I did it correctly. I used Amazing Goop for ease. I have these on an h-quad, but they make a lot of vibration. I think all bells have that as they have such a small support, but large bell. For the price I'm sure you can find better motors that spin freely and have no need for modification.

Akshat | Verified Buyer

Overall
Quality
Value

Certified Buyer Rated

Apr 05, 2014

Good motors ....for the price....the issue is you can't really tighten props as if you try to screw the props too tight the shaft has a tendency to slip and cause the end ring clip to push against the bottom bearing causing the motor to run like its a bit jammed...gummy feel...I would go for the zip tie method to mount props....better bearings would be great....and neater windings would make this a killer deal....I don't think patrons would mind paying a couple of dollars more for this...all in all it is a great motor for a cheap not so trusty multicopter

fotod | Verified Buyer

Overall
Quality
Value

Certified Buyer Rated

Mar 13, 2014

Superb item to use in all RC stuff. Just safe peace of mind that you have a tad better item in your gear. Buy with confidence

ALCARAFA | Verified Buyer

Overall
Quality
Value

Customer Rated

Jan 18, 2014

good motor, altough winding is not the best quality.

If you crash your plane and shaft bends, there is no replacement parts for it.

Manuals/Files

Customer files

better_way_for_screws	Download [30]
DT700 on homebuilt Karbon-X Frame	Download [278]
DT700 on homebuilt Karbon-X Frame	Download [287]
Custom motor mount	Download [126]
No File Name	Download [48]
Winding1	Download [847]
Winding2	Download [754]
Winding3	Download [772]
DT700 vs L2210-1650 data set	Download [24]
DT700 vs L2210-1650 data set	Download [24]