Finally, big scale heli flight on a small-scale budget.
The HK-600GT breaks all the rules and sets a new precedence in big 3D heli value.
Modeled on the famous, award winning and proven T-Rex 600, the HK-600GT will push your 3D flight skills to their limits.The 600GT is an exciting helicopter to see in action as it roars through the sky and is surprisingly much easier to fly than a smaller version.It's 7075 alloy head ensures hard core 3D pilots wont be dissapointed in the performance and the simple yet light weight and attractive cowl plus Titanium anodized components make this a visually stunning helicopter with performance to back it up!
We guarantee you wont find a better priced heli of this size anywhere!Features.
Light weight design provides awesome flight performance and extreme 3D capability.
Rotor head/tail with thrust bearings.
Center of gravity of battery tray designed close to the rotor head.
High efficiency belt driven tail.Fully driven tail auto rotation system.
Tail servo boom mount.
Carbon Fibre boom support rods and tail servo mount.
Carbon Fiber main frame, tail Fins and anti-rotation bracket.Specification:Length: 1200mm(47.25 in)
Height: 388/405mm(15.25 in/16 in)
Main Blade Length: 600mm
Main Rotor Diameter: 1350mm(53.15 in)
Tail Rotor: 240mm(9.45 in)
Motor Drive Gear: 10T(11T optional)
Main Drive Gear: 170T
Autorotation Tail Drive Gear: 180T
Tail Drive Gear: 40T
Drive Gear Ratio: 1:17.0:4.5/1:15.45:4.5
Weight(w/o main blade): 1340g
Flying Weight: Approx 3000g(6.6 lbs)Required items.
Servos : See linked items below.
Radio Gear : Gyro/Rx
ESC : 80A or greater.
Battery: 3300mAh or greater
Finally a great helicopter for the lowest budget as it gets!
I started with 450 size, and wanted something bigger. The HK600 is excellent, when you do the setup right, it stays in air almost alone. With 6S 5000mah Lipo, hobbywing platinum ESC, Turnigy 800 outrunner and rotostar digital servos.Got 3 one for night ,one for day,one for 3d.all 3 are greatGot 3 one for night ,one for day,one for 3d.all 3 are greatGood deal for the money. A metal tail slider would be nice considering the tail rotor is all metal except for this piece. Good complete kit. High quality hardware. Good entry level helicopter kit.Today 04/16/2016. All head plastic links needed to changed. Was aprox 2mm too short.Replaced with original ones. If you try to give lenghts on links according 600CF manual, you remain with 2.5 mm thread in each link.
GOT ANOTHER HK600GT. ARRIVED ON TIME AND UNDAMAGED. THIS TIME IM GOING TO FIT IT INTO A FUNKEY 50 SIZE JETRANGER BODY. IVE HAD TO MODIFY THE TAILBOX SLIGHTLY TO ALLOW IT TO SLIDE THROUGH THE TAILBOOM OF THE JETRANGER, BUT IT FITS IN NICELY. REALLY GOOD VALUE KIT FOR THE PRICE. THANKS AGAIN HK.GOT THIS HELI A WHILE AGO BUILT IT AND GAVE IT ITS MAIDEN FLIGHT TODAY. FITTED WITH HK401 GYRO BLUEBIRD SERVOS 150 AMP YEP ASC ASSAULT MOTOR AND JR RADIO GEAR. HOVERED NICE AND STABLE ON HEAD HOLD IN 17MPH WINDS. VERY IMPRESSED. GOOD QUALITY KIT. USE ALIGN 600 INSTRUCTIONS TO BUILD AND TAKE YOUR TIME. MINE USES 6S BATTERIES.After building some of this helis 3 - 4 years before, with much work to do to fix some major problems, this kit was a big surprise. This time it is not for a friend, it was time for my first own HK-600 GT. It is far better packed than ever before, so the main rotor shaft is not bend. The main gears are perfect true-running without any issue. The main rotor is moving a little tight, but this will be fixed after it is re-build with loctite and grease. The tail rotor runs smooth, this should be perfect after re-building it. This time i don`t need an Align main shaft or gear, just the ball links. The ball links coming with my kit are far too tight so i`ll change them. The best thing is, i don`t have to file out the blade holders to make the rotor blades fit, and this is a big improvement against former kits. All ball bearings except for the ones in the push-pull mechanic run smooth, and the push-pull thing will be removed for a direct linkage from the servos to the swashplate. I reporter all the issues i found on earlier kits to Hobbyking, and now they`re fixed. The only issue left is a crack in the canopy from the main chassis, but this is easy to repair before it gets some paint. The slightly bent receiver platform can be corrected with some heat, so not really an issue. Thank you, Hobbyking, for your open ears and the improvements made on this kit! I`m happy with it!I have the mini titan 450 and a trex 450. and I have a clone trex 500 with a md500 body on it with all hobbyking electrics. so I have now gone for the hk600 and wow grate heli for the price the trex600 parts fit to this heli but only from the first version (v1) now all I need for this hk600 is a nice scale body shell hope hobby king starts selling them for the 500 and 600 sized helisthe kits ok for the price a few small things are wrong with it but if you want quality you have to pay for it i'm still really happy 1/4 of the price of a real trex and you cant complain about that
HK 600 GT LEFT SIDE download now [536kb] HK 600 GT GYRO download now [525kb] HK 600 GT GENERAL download now [440kb] HK 600 GT RIGHT SIDE download now [639kb] HK 600 GT GENERAL download now [440kb] No File Name download now [4501kb] 377172265X159167X29.JPG download now [395kb] HK 600 download now [381kb] HK 600 download now [381kb] 989927405X191680X40.JPG download now [18kb] Hk600GT in ZA download now [1809kb] HK600 acrobatic download now [81kb] HK600 in Switzerland download now [108kb] HK600 in Swiss Snow download now [155kb] HK 600 flying download now [28kb] Trex 600cf manual EN download now [3674kb] HK600GTnight flying download now [2533kb] faulty blade holder download now [191kb] faulty blade holder download now [202kb] faulty rotor download now [248kb] HK600 FirstFlight download now [108kb] HK 600 GT Airwolf Bell 222 download now [461.98Kb] HK 600 GT Airwolf Bell 222 02 download now [395.68Kb]