- Overview
-
HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON THE LEFT)Hobbykings T4A 2.4ghz system is an entry level transmitter offering the reliability of 2.4Ghz signal technology and a receiver.
The T4A makes a good backup transmitter or a take anywhere unit. Drop it, scratch it, leave it in the car and forget about it. This is what the T4A is all about.
Not suitable for the multi flapperon, mixer, vtail, FPV, robot controlling hobbyist.Key Features;
4-channel 2.4GHz transmitter with servo reversing.
Easy to use control for basic models.
Includes 6-channel receiver
Trainer system option.
This system does not need a PC to program servo direction.
Included;
1 x 2.4Ghz transmitter
1 x 2.4Ghz Receiver
1 x Bind Plug.
Note:
Only HK-T6A receiver is comptible with HK-T4A transmitter.Only HK-T6Av2 receiver is compatible with the HK-T4Av2 transmitter. - Specs
-
Additional Information
-
Blade Count:
N/A
-
Diameter X(Inch):
No
-
SKU
HK-T4A-M2
-
Weight(g)
810.00
-
Length:
240.00
-
Width:
100.00
-
Height
200.00
-
Blade Count:
- Discussion
-
- Reviews
-
-
Works very well.
Very easy to bind and configure. -
Excellent entry level Tx that I would recommend again and again to anyone who wants to get started in Rc or anyone who wants a basic tx. Beats paying way more for a brand name product that does the exact same thing. Binding procedure is a bit difficult to get at first but once you find the answer its easy.
-
Good build quality for a fair price, but no trainer cable and when I did finally get it to bind I didn't have aileron control. You get what you pay for.
-
To Bind this transmitter use this manual and it works good i found it and it is the seem product as the Hobby King 2.4Ghz transmitters
-
I have 5 of these I use them for rc sailboats never had any problems at all
with them -
One of three came with a loose gimbal. Repaired it relatively easily.
-
With this, you get what you pay for. It is a very inexpensive radio, but it works.
When you get it, open it up and check the solder connections, expecially to the sticks and the battery.
Good value for small planes where you don't need a lot of features and range.
The receiver is small and light. Binding is straight forward if you know how!
Works with some Turnigy receivers. -
I brought 10 of these for some students at school. They are fantastic, a great first TX, and if you move up a step the 4ch rx that comes with them binds to the turnigy 9x. This means you do not have to buy new rx for all your planes!
-
Another fantastic, value for money product. I use mine with my son on his ez fly and his tugboat. It is superb for both. Very cheap price but a great controller
Great for a beginner
-
Good cheap radio, binding is a bit complex though
-
- Video
- File
-
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesHK-4ch-Ver2-Tx-Manual download now [25kb] HK-4ch-Ver2-Tx-Manual download now [25kb] HK-4ch-Ver2-Tx-Manual download now [25kb] HK-4ch-Ver2-Tx-Manual download now [25kb] HK-4ch-Ver2-Tx-Manual download now [25kb] Software, settings: default and Kinetic download now [4841kb] setup your Tx download now [21kb] For HK-T6A Transmitters download now [2995kb] No File Name download now [10kb] Picture of RX and TX download now [825kb] Bind instructions download now [202kb]
-
-
-
PLANES
-
-
-
AIRPLANE ACCESSORIES
- EDF Systems & Parts
- Wheels/Landing Gear/Retracts
- Spinner/Adapters
- Propellers
- Wires & Connectors
- Heat Shrink / Shrink Tube
- Flight Stabilization Systems
- Horn/Hinge/Clevis
- Screws/Bolts/Nuts/Fasteners
- Covering Film
- Decal Sheets
- Glues, Lubricants & Tape
- Night Flying Accessories
- Push Rods
- Tube, Rod, Carbon Fiber & Glass Fiber
- Pilots
-
-
-
TELEMETRY & FPV
-
-
-
-
-
-
POWER SYSTEMS
-
-
-
-
BOAT ACCESSORIES
-
-
-
-
AERIAL VIDEO
-
-
-
POWER SYSTEMS
-
-
-
-
DIY & ELECTRICAL ACCESSORIES
-
-
-
3D PRINTING
-
-
-
-
AIRSOFT GUN REPLICAS
-
-
-
SCOPES / LASERS / AIMING DEVICE
-
-
Company
Category
My Account
Customer Service
Discount PriceLetter