New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

HobbyKing Mini Quadcopter Frame V1 - 539mm

HobbyKing Mini Quadcopter Frame V1 - 539mm

Discontinued Product

Please continue searching for a similar product.
Weight:
238 g
SKU:
MINI_QUAD01
WANT FREE SHIPPING? Click here to find out more!

The HobbyKing Mini Quadcopter frame is an inexpensive platform for Quadcopter experimentation. Built from light weight ply wood and shipped in flat pack form to save on postage costs, Quadcopter fun does not get any more affordable than this!

Specs:
Height: 50.5mm
Width: 539mm
Bolt Holes: 12/16/30mm

  • SKU MINI_QUAD01
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight(g) 238.00
  • Length 300.00
  • Width 10.00
  • Height 130.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimo frame base di facile assemblaggio (serve solo un po' di colla per legno). grazie al suo peso ridotto si presta benissimo come telaio di partenza per la realizzazione di quadricotteri personalizzati. per esempio l'ho rivestito di vetroresina e reso impermeabile per poter atterrare anche in acqua riuscendo a mantenere un peso accettabile.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimo frame base di facile assemblaggio (serve solo un po' di colla per legno). grazie al suo peso ridotto si presta benissimo come telaio di partenza per la realizzazione di quadricotteri personalizzati. per esempio l'ho rivestito di vetroresina e reso impermeabile per poter atterrare anche in acqua riuscendo a mantenere un peso accettabile.

Read this before buying. Doesn't support properly motors with 1,9 mm hole spacing.

Thin plywood; about 1.9-2.0 mm; breaks easily.

Unable to mount KK board (both and x mode are not possible) without drilling holes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Read this before buying. Doesn't support properly motors with 1,9 mm hole spacing.

Thin plywood; about 1.9-2.0 mm; breaks easily.

Unable to mount KK board (both and x mode are not possible) without drilling holes.

Snug fit on all parts, no sanding as on the larger frame I bought. Empty weight was about 106grams including some glue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Snug fit on all parts, no sanding as on the larger frame I bought. Empty weight was about 106grams including some glue.

Quite big cap's between the joint so use thick glue. Hard to tell if it's balsa or plywood. Pieces nice cut.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite big cap's between the joint so use thick glue. Hard to tell if it's balsa or plywood. Pieces nice cut.

When I considered to build a Quadcopter with low budget I thought that this was the perfect frame for beginners, it is light, it is cheap, and in some way beautiful.
I was wrong.
It is not the right choice for beginners, because when you land with it you have to do it very smoothly, otherwise you will break one leg. It you make a mistake and the quad goes down it is very easy to break the plywood that supports the motor. OK it is less than 8$, but just for the fun of build it, not for the fun of fly it.
I made myself a wood fram for 1,5 Euros (and wood tools) and it flights great, maybe because I learnt what not to do with this frame ;-). My advise, reinforce the legs or spend a bit more to get something more strong.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When I considered to build a Quadcopter with low budget I thought that this was the perfect frame for beginners, it is light, it is cheap, and in some way beautiful.
I was wrong.
It is not the right choice for beginners, because when you land with it you have to do it very smoothly, otherwise you will break one leg. It you make a mistake and the quad goes down it is very easy to break the plywood that supports the motor. OK it is less than 8$, but just for the fun of build it, not for the fun of fly it.
I made myself a wood fram for 1,5 Euros (and wood tools) and it flights great, maybe because I learnt what not to do with this frame ;-). My advise, reinforce the legs or spend a bit more to get something more strong.

Cheap product, be sure to reinforce it first, i used thin ca to soak it and titebond later

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap product, be sure to reinforce it first, i used thin ca to soak it and titebond later

pretty nice... for $8, but that's about it. It's not crash resistant at all. You crash once and it turns into a pile of splinters. But it's light weight and it looks decent.

The landing feet are just silly, it's better to cut them off and just use foam blocks instead.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pretty nice... for $8, but that's about it. It's not crash resistant at all. You crash once and it turns into a pile of splinters. But it's light weight and it looks decent.

The landing feet are just silly, it's better to cut them off and just use foam blocks instead.

Sehr passgenauer Rahmen, leider etwas weiches Holz, was dennoch stabil ist. An fr sich in der Preisklasse unschlagbar.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr passgenauer Rahmen, leider etwas weiches Holz, was dennoch stabil ist. An fr sich in der Preisklasse unschlagbar.

hy, not quite nice cut kit, but look at the price, not to resistent, but again look at the price, full of vibration but...price. in all: cheap cheap, wouldnt buy it again. better look for carbon spars some carbon frame much better. for price but thats all.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hy, not quite nice cut kit, but look at the price, not to resistent, but again look at the price, full of vibration but...price. in all: cheap cheap, wouldnt buy it again. better look for carbon spars some carbon frame much better. for price but thats all.

For $7 it is hard to go wrong but still easy to break. Only using this til my $30 plastic one arrives, hope HK make some plastic ones soon like the DJI450/550 with flame wheel.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For $7 it is hard to go wrong but still easy to break. Only using this til my $30 plastic one arrives, hope HK make some plastic ones soon like the DJI450/550 with flame wheel.

  1. 1
  2. 2
  3. 3
Customer files
in flight Download [3785]
157536382X430232X46.JPG Download [514]
157536382X430232X49.JPG Download [503]
157536382X430232X4.JPG Download [503]
Super mini quad copter w/motors kit Download [1087]
No File Name Download [208]
No File Name Download [208]
start of something 1 Download [595]
start of something 2 Download [589]
somthing is broken Download [501]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save