Built for speed but with a low wing-loading, the Parkjet MkII screams across the sky and can still glide in for a slow landing.
The MkII is now available in Kit form allowing you to customise your own speed machine! you will require a brushless outrunner, ESC and Two 4.5g servos. A light weight fibre glass mount and a 10mm Stick mount are both included with the kit allowing you to install extra hot motors!
The HK Parkjet is a fantastically fast park-flyer with very docile and predictable slow-flight characteristics, its easy to land and hand launches are made simple with underside finger holds which also mark the CG location. The main wings are reinforced with carbon fiber rods and the fuselage can take a huge variety of batteries from 800mAh up to 1400mAh!
Wing Span: 600mm
Weight: 138g (with battery ~190g)
Motor: 2730-3000kv+ (Required)
ESC: 20A+ (Required)
Prop: EP-5x5e+ (Required)
Battery: 11.1v 800mAh 3S1P+ (Required)
Servos: 4.5g x 2 (Required)
Control Horns and rods
10mm Stick mount
Glass Fibre motor mount
2 x 4.5g+ Servos
Your TX & RX
11.1V 3S 800mah lipo battery
it was my first plane i ever bought and i have to say, the assembly was very easy. Poorly i never got it to fly till now (it just twisted when i started the engine and crashed down :-( ), this evening i will have another test with a smaller lipo and a smaller prop then the one i used b4. Already ordered another one (this time the full set with everything in it).
Great two cell runner but when I try three cell 550mha and a hobby-king 25-30 Esc the Esc twitches the motor now nothing but I test the motor and it still works the 24gram hexatronic 3000kv . So what Esc will for sure work on this please help my son and I are very dissapointed . I bought two the other works great 2cell I'm not trying three till I know why or what happened to the first this was the recommended setup it didn't work for usI had my first flight today.Gave it a toss and it hit the long grass. The motor split open so I re glued and reinforced with the tap supplied. All is ok for another attemp. Where should the battery be positioned? and what about CG as there was no Instructions with the kit.any suggestions
on launching??Noel MadiganMine is ready to fly.
It's my 2nd park jet. One of my friends crashed the first one !
Feigao brushless motor, 4834 kv, max 20A
11.1 V 1300mAh 25C battery
Weight: 13.40oz or 380g
19.5A, 288 watts
See it under the files tab.Too bad I got my Parkjet with two left wings. wings as a replacement part can not be delivered. I do not want a complete set just buying the wing because then the weight would be under 500g. But HobbyKing has returned me the money immediately (for that I give it 5 crowns!) But the expensive shipping costs I paid for and can not fly parkjet which is sad.
Looks Nice Missing decal set and 2 vertical stab hope warranty this time works
Motor Mount dosent fit some knife file work has been done
Llego sin calcomanias y sin las 2 aletas verticales la montura de fibra no encaja corte y limado para encajar
el centro de gravedad esta claro donde va lo demas hay que adivinar como va ojala vuele bienGreat fast plane this one. With the turnigy 2632 3400 kv on 3s and 4.5x4.5 prop it will be ballistic! I clocked mine at 190 km/h with rcspeedo. Just be sure that you accelerate enough on takeoff or it will hit the ground. It also flies really nice with big winds.
Here's a video of my parkjet modified: http://www.youtube.com/watch?v=2iRFyWCGAas&feature=g-upl
Cheers!Build it as follow:
Turnigy 2826 2200kv
Tgs 6-4 prop
Hk 40A Esc
1300mah 3s 40c
CG as per manual.
What an awesome aerie.
Not immensely fast but still awesome!!
I fitted a 2628-2200kv motor with a 6x4 ths prop. 30a esc and 1300mah 3s 40c. What an awesome aircraft. You wont be dissapointed.This model suffers weakness of the canopy and front fuselage. I have found a way to stiffen and also keep canopy well seated and prevent it's loss in flight. Either side at mid-point along canopy vertically down through fuselage .. a long M2 bolt to blind nut under. With large washer under bolt head ... you can tighten down into the foam enough to have head below surface. Remove and epoxy to strengthen before putting bolt back again.
Alita MAde In Spain download now [207kb] No File Name download now [375kb] Parkjet with Feigao brushless motor download now [824kb] No File Name download now [204kb] MC's Parkjet (bottom) download now [169kb] No File Name download now [3949kb] Shooting Stars download now [703kb] M Novis Hobby download now [106kb] M Novis Hobby download now [113kb] brushed download now [1145kb] Custom Paint Scheme download now [159kb]