The long awaited and highly anticipated HobbyKing Quadcopter control board is finally here!
Based on the popular and already well supported KK Control board, the Hobbyking Quadcopter control board is bringing Quadcopter madness to the masses with its breakthroughs in quality and price!
The HobbyKing Quadcopter control board uses Japanese Murata piezo gyros that are less sensitive to vibration than SMD type gyros and also features state of the art SMT manufacturing to ensure quality. This board also uses a user programmable Atmega48PA IC.
Size: 50.5mm x 50.5mm x 23.5mm
Weight: 14.5 gram
Gyro: Murata Piezo
Input Voltage: 3.3-5.5V
Signal from Receiver: 1520us (4 channels)
Signal to ESC: 1520us (4 ESCs)
Whats is a Quadcopter Control board you ask?
The HobbyKing Quadcopter controller is a flight control board for 4 rotor Aircraft (Quadcopters). Its purpose is to stabilise the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega48PA IC. The Atmega48PA IC unit then processes these signals according the users installed software and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabalises your Quadcopter.
The HobbyKing Quadcopter control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega48PA IC via the ail, ele, thr and rud inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).
Note: A user manual is available under the files tab.
trs bien rien a dire , mon quadricopter vole trs bien et trs stable
je recommandejust got this item. Need help to install. How do I get to the user manual? it says this is in the file tab. Where's the file tab?
Any help appreciated and thanks.It blew a super product today, better than I expected output, expensive products seem to be no need to rope in the air, we strongly recommend you, my expectation is very balanced on the easy setting ..
sper rn bugn ucurdum tricopterimi,bekledigimden cok daha iyi cikti,havada ip gibi duruyor pahal rnlere hic gerek yok,siddetle tavsiye ederim,benim beklentimin stnde oldukca stabil ayar kolay..hi all, hk quad and this board flight prefectly ! a question, at eatch start, i need to put full in the corner left stick of my turnigy radio to activate the board (red led); is it ok or what should i do to avoid this manipulation ? i have already test to increase down trim at maximum. thanks, and long life to hk !!!buena pinta y perfectamente embalado. Estoy a la espera de motores y reguladores para probar su funcionamientoVery good electronic board. The setup is simple if you are methodical .... This is not my case so I took the time. after connected all the right thing here is what I did:
1.Put the throttle in max position
2.Plug the battery
3.unlock the engines! Mode 1 ==> the left stick at the bottom right. If this does not work =>> you need reduce the throttle trim.
The red LED should turn solid.
4.Wait the first series of beeps
5.put throttle in minimum position
===> the starter motor in sync.
2.Check the direction of rotation of motor (Schematic of exit if you do not know)
3.verifier gain and follow the instructions if it is the wrong way ^ ^.
1) once you were on your engine react logically to the propellers if not re-read the official manual ^^ .
2) if your machine Oscillate reduce the gain.
3) if the flight as a drunkard increase. ^ ^
NB ====> for MODE X instead of just turn ON the mix "ELEVON"
If this method does not work, or if something is missing read the manual.
Careful with propellers!!
A video of my quadricopter
Very good small control board ,workt very well right out of the box.
the price is really good as well :)I Put this on a kit quad from another company and loaded the latest x firmware. Google lazyzero for an excellent programming software tool. My programmer was the pocket avr from sparkfun. Easy as 123 even for a noob like me. Flies like it's on rails. I Couldn't be happier with this board.Very nice board, I have 4 flights with is. I just had to trim down power and invert yaw gyro and it flys!!
Manual download now [1763kb] manual_espaÃ±ol download now [42kb] MANUAL EM PORTUGUÃŠS download now [691kb] Best Manual Available download now [883kb] x type diagram download now [64kb] HK Quad-con - Tricopter (NOT original So download now [2728kb] No File Name download now [1939kb] 10 pin uploader download now [42kb] 10 pin to 6 uploader download now [41kb] x-diagrammm download now [64kb] Wiring diagram download now [106kb] Wiring diagram download now [106kb] manual CZ download now [38kb] x version tool kit download now [0kb] No File Name download now [1763kb] KK X525 Quadcopter ARF Build Written Ins download now [32kb]