This stunning looking Sbach 342 is a pure, mean, 3D machine! The superb Ultra-light construction, which features a sheeted spine fuselage for strength, keeps the flying weight minimal, couple this with a 30cc gas engine or Turnigy electric equivalent and you have unlimited vertical performance!
The wings and horizontal stabilizers are plug in for easy transport, the tailfeathers are not flat sheet but full aerofoil, the control surfaces are easily large enough for 3D maneouvers. Rudder is pull/pull and high quality ball linked control rods are used throughout for precision and reliability. The pre-applied covering is glossy and of a very high standard, the colour scheme is ideal for orientation and looks superb in the classic Sbach scheme. This is a high quality 3D model that is also an ideal everyday sport flyer when set up on low rates, either way, its a real performer and a real looker!
Plug in wing & horizontal stabilizer
Scale colour scheme pre-applied
Alloy re-enforced under-carriage mount
Ball link clevices with turnbuckle control rods
Comprehensive hardware including fuel system
Alloy anodised fuel dot included
Servo extension arms included
Wing Area: 68dm2
Flying Weight: 4.5~5.3g
Your Own 6 Channel TX/
6 x MG High Torque Digital Std size Servo
30cc~35cc Gas Engine
reu le mien aujourd'hui quelle dception !
rien a voir avec les photos, ce n'est pas le meme avion, le capot est diffrent, le stab est non dmontable il est en une seule partie et se colle dfinitivement.
les stickers ne sont pas colls, l'avion semble trs fragile, et l'emplacement sur le fuselage dans lequel rentre les ailes, n'est pas bien ajust, il y a donc un jeu de plusieurs millimtres assez moche !
l'entoilage est ray (micro rayures), ils ont du utiliser un chiffon non adapt ou sale (ou encore le cote vert de l'ponge) pour essayer lors de l'entoilage, du coup on voit des traces dpolies sur les zones ou l'entoilage est de plusieurs couleurs !!
je suis assez du, heureusement qu'il tait en promo car au prix normal ce kit est correct mais n'est pas une affaire !
My plane arrived today. No damage which was a result. Shame model is not the same as advertised. My plane does not have plug in horizontal stabilizer and decals came on a sheet. Cowl is different to the one shown. Have not had a good look at hardware pack but what i have seen looks different. Apart from not being the same model in photos it looks okay. Shame they dont supply a manual.Great plane and arrived in an awesome solid packaging. Looks great and should have it in the air very soon to report back on how it flys.
I have the (great) Sbach 342 - 30cc ordered and was delivered within three days.
Everything is well packed in a sturdy cardboard box.
My compliments to the HK employees.
But unfortunately can not find a manual.
Maybe someone knows where I can download the manual?
Thanks in advance.WOW WOW WOW! I was not sure what to expect when it arrived today. I was dreading opening the box to a damaged model and it being poor build quality - how wrong could I be! It is superb! Its as well built as any of my big 50cc models. The covering is drum tight, the build quality excellent. Well done HK - this is superb! I will post an unboxing video shortly..... Go on treat yourself!just maidened mine this morning. what a rock solid flying model! im used to foamies where characteristics are somewhat doughy. this thing flies like its on rails. had a small issue with the third flight as the exhaust bolts loosened which led to the departure of the exhaust. as i brought it down a gust caught it and bounced once. this caused the left axel to snap and sent the left wheel headed for a short field landing. thanks to the awesome stability of this plane i managed to touch down and keep the left wheel pant off the ground till the last min. came to a stop without nosing over. got it on video as well.. so i will upload soon :) all in all.. no damage to any of the airframe. replaced the axels and found the exhaust. just flew it again just then.. 5 stars hobbyking!!I bought this thing a couple months back, price $74 shipping was not worth it for me, because quality of material used is cheap, the worst part for me is the control surfaces of ailerons are curved and uneven, I had to use a lot of trim to get it level, covering is not that great either, cheap decals, plan on replacing them. it dose fly don't get me wrong but do not expect it to fly hard 3D, material used is not up to the task, I am going to use it as a sport flyer and get a better brand at some point. if shipping wasn't high I wouldn't feel so bad.Nicely built air frame. No shipping damage at all, although shipping was around $57, it was well worth it.Quality wise it looks good, slowly putting it together, will review again once maidened.Mine arrived today. Looks to be in great condition.....but no undercarriage included in the box. Is it meant to have an undercarriage? Seems reasonable to expect one to come with the kit.