The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug & play.
A perfect ESC for those looking for something simple to use and economic.
Cells: 6-20Ni MH ~ 2-7S Li Po
Max Current: 70A
Timing: 1/7/15/30 programmable
Constant current 70A Max 80A <10S
Li-Poly 2-7 cells Ni-MH 6-20 cell
Auto shut down when lose signal
Slow down at 2.8V per cell Lipo, Cut-off at 0.8V/cell NiMh
User Programming options:
Brake setting 4 options:
Direction and Cutoff Type
Timing Mode Setting: 1 / 7 / 15 / 30
PWM setting: 8K/16K
FET's are Taiwanese, unlike our TURNIGY esc which use USA FET's. So we suggest customers to not draw more than the 70A rated capacity.
Decent size, check the dimensions if you don't have much room. Aluminum heatsink on its backI Use this for a HK-500 TT. It works relyable with 1600kV Motor and throttle curve.
It is not possible to switch off the soft start and governor mode is not working.
I use it sience 2 years and hundreds of flights had no problems....Really screwed up. I bought three of these, and for the life of me I didn't see that they were for helio's. Can they be used for Aircraft?? How do you set the throttle for hard start? Can't find any info on programing. Thanks, Ken McCormackThis speed controller is currently installed for my hk 450 se v2, running cool but governor mode is not working correctly, have tried different setting. Value for money since the price is so much lower compared to other with the same AMP.Good speed controller. I have not had problems.
For the price you get enough power. Not warmed up much at workHi,
I use it on HK500CMT and it works fine with Turnigy 500 H3126 Brushless outrunner 1600KV and 12t pinion - HS is around 2600. Maybe SoftStart could be a little "softer"...the rest OK - it is not even hot after flight, but i do just mild 3D.
ByeWorks fine - for a low-budget ESC - only 4 options available to program...not 6. When you look at what your LHS wants for these - it's a no-brainer to go with Hobby-KingThis ESC works well but picks up too quick on initial power up snatching main rotors on HK 500. Could do with a softer start.i can't acces to options 5 and 6... can someone help me please ?
lipo Turnigy 6S 3000Ma
motor : Turnigy Typhoon 500H Heli Motor 1800kv
je ne peux pas accder aux options 5 et 6, une solution ?I installed this on my Gaui Hurricane 550, it works well, tho the soft start is not really soft. over all the esc works great tho
25grams saved if using low Amps download now [106kb] FET side download now [112kb] 52416021X967X38.JPG download now [105kb] SSH70A Manual (Czech translation) download now [112kb] SSH70-80A Manual (German translation) download now [75kb] SSH70-80A Manual (German translation) download now [75kb] 793930974X86761X6.doc download now [78kb] HK SS H70A H100A ESC manual download now [49kb] instrutions in word file download now [78kb] Instrucciones HK-SSH70A espaÃ±ol download now [60kb] SPEED CONTROL download now [24kb] manual download now [113kb] No File Name download now [78kb] No File Name download now [69kb] No File Name download now [157kb] MANUAL download now [112.54Kb]