The Hobbyking ZYX high performance multi-function 3-axis gyro system is the lightest flybarless system in the world. It is compatible with all 200-700 nitro or electric power helicopters and support 90, 120, 135, and 140 degree CCPM swashplate systems. Furthermore, it is compatible with all types of servos; supports both digitial and analog 1520us, 960us and 760us servos. The setup process is quite easy, takes only about ten minutes. This unit also supports firmware updates.
ZYX 3-axis gyro system provides two different flight modes - F3C and 3D, which can satisfy pilots from beginners to advanced. ZYX 3-axis gyro system has many adjustable options; pilots can adjust the parameter of swash plate and tail servo response, which allows the user to fine tune the handling characteristics of the helicopter.
ZYX high performance 3-axis gyro system uses MEMS gyro sensors which allow the pilot to control the flying status of helicopter precisely. Built-in pirouette optimization function; stabilizes the helicopter while pirouetting, making the advanced manuevers much more precise.
*Note: We have tested this unit on our HK450PRO and are very impressed with the performance. The ZYX flybarless system is an unbelievable value at a fraction of the cost of other systems currently on the market. Check out the video below of us testing this unit on the HK450PRO with flybarless head upgrade.
Weight: 9.8g (without wires)
Operating Voltage: 3.5~9V
Sensor Technology: 3 MEMS angular rate sensors
Flight Modes: F3C / 3D
Included in box:
English user manual
5 gyro mounting pads
All necessary wire leads
i installed ZYX with Hitec 5065mg(960us 333Hz) for tail servo.
everything is fine except tail servo EPA.
while i set tail servo EPA with USB tool or programmer tool, it works very well.
but after disconnecting of tool and rebooting gyro
tail servo EPA doesn't work correctly.
i tested gyro with another tail servo(INO-Lab 261HB 1520us 333Hz).
new servo works fine with ZYX.
again... i checked hitec 5065mg working with spartan quark.
5065mg works fine too with quark.
if you plan to use ZYX with 960us tail servo, consider this problem.
my ZYX version is v3.50.
i hope that next release firmware solve this problem.Excellent overall, have installed it in my 600 size heli, 1188KV motor, tunigy 80A ESC, 7 ch orange spectrum receiver with satelite, D50012 on the tail, RXJ Flybarless head, HTX12K on cyclic, very cheap but excellent, with turnigy orange canopy, looks great in the air, will replace cyclic servos 620DMG-HS ( following items are align, orange boom, tail unit, swash plate, landing gear and voltage regulator)setup in hk 450 pro. surprise with the result. i can fly finally, hover, hands free. superb!!! easy setup once you got it.
Working well on T-Rex 450 Pro TT and T-Rex 600 TT. Definitely cheaper but solid. I recommend buying programator. It makes setup much easier.
I do recommend this gyro.very goog gyro ,im using it for my hk500 head rjx.very responsive and stable flyingThere are no manual.Gyro was out of protection and have many scratchs.It had been given much impacts during transportation.
It is seemd work,but I dont belive it perfctly.Veramente stupendo.
Facile e istintiva la programmazione.
Lavora molto bene e tiene l'elicottero veramente fermo.
Un prodotto economico ma efficace nel suo lavoro !!!!Unused User recommended the purchasethis unit works well need alittle help I have a little wobble in the tail and can;t get rid of it .one advice was to loosen the tail blades a little any other advice as other than that it is a very stable flight it is a HK Pro torque tube 450 helliAfter a very frustrating period of trying to get this gyro to work properly I found out that the rotor gyro action is not working. In essence, it's like trying to fly without a flybar, the exact opposite of what it's suppose to do.
That said, if my specific unit was not flawed from Tarot, I would have been very impressed with the features and quality of the FBL gyro.
MANUAL EM PORTUGUÃŠS download now [102kb] Tarrot vs Beastx 1 download now [936kb] Tarrot vs Beastx 2 download now [905kb] Tarrot, Beastx, 3G download now [917kb] ZXY_Trex450Sport download now [1185kb] Instruction manual download now [1289kb] ZYX 3 Manual PTBR download now [2359kb] ZYX 3 axis manual (Rus) download now [326kb]