Standard 45A car esc with forward reverse and a good range of features such as timing adjust and breaking. Supports a wide range of motors. Very reliable!
Full protection feature including low voltage, over-heat, throttle signal lost, startup
protection and self-check.
Compatible with sensorless brushless motor.
Excellent startup performance, linear and quick throttle response.
Supports highest motor speed 240,000RPM(2 poles), 80,000RPM(6 poles) and 40,000(12 poles).
Easy to configure with program card.
System can automatically detect throttle neutral point, and neutral range is adjustable.
Three work modes for different environments.
4 step reverse force adjustment
5 step start force adjustment.
3 step brake force adjustment
5 step drag brake force adjustment,
4 step initial brake force adjustment.
Input voltage: 2-3S Lithium batteries / 4~12 Ni-xx
Cont. Current: 45A
BEC output: 2A/5V (Switch)
Size( length X width X high): 45x32x20mm
Weight: 60gAs with all HobbyKing® ™ products, you don't need to ship it back to Asia for warranty. We have warranty centers in USA, UK and Australia!
Even my, just turned on, after a few seconds the LED of the receiver has decreased its light, and the ESC has restarted.
This has happened several times, fed to 4s with charged charges, after setting max backward and forward.
Then I disconnected the fan and it did not happen anymore.
I used the car for several minutes and had no problems.
I also noticed that with the esc turned on, without starting the engine, the bottom part was very hot, while disconnecting the fan warmed up less.
the fan is powered at 5v, it could be the same power supplied by the BEC, and perhaps this causes a problem to the power supply of the receiver with the BEC.
I will try to understand if the problem can really come from this by doing other tests for longer.Hi, i have problem, after one minute of driving esc make restart, again short time of driving and again restart...what is problem ? ThanksHi, why it stop after one minute drive and restart, 3 S battery ? Thaksbueno y barato simpleThis ESC uses programing card This ESC uses programing card PRODUCT ID:
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXRun great with hsp 3300kv motor and zippy 5000mah 20c In my HSP SCT.Overall good esc, many functions works flawlessly with the "HobbyKing Programming Card for Car ESC"This is strong and the Fan is Quiet, I use it on one of my 4X4 trucks and get good torque. It is easy to change the settings with the "key" button to get reversing!!good for using, I use it for boatDoes anyone know why it starts and stop the power on 3s? Anyway it works on 2s fine just not as fast:).
THIS ESC 45 A IN MY SAKURA S download now [660kb] THIS ESC 45A IS PERFECT TO 1/10 CAR download now [656kb] PERFECT WHIT 13T ENGINE download now [671kb] HobbyKing Brushless Car ESC 45A w/ Rever download now [534kb] esc mounted download now [4775kb] 45A mounted in sparrowhawk XXT download now [2537kb] X_Car_45A-manuel-fr_v2 download now [105.91Kb]