Hitec HS-5085MG Digital Micro Servo (Programmable) 4.3kg / 0.13sec / 21.9g
Hitec HS-5085MG Digital Micro Servo (Programmable) 4.3kg / 0.13sec / 21.9g
Copy and Share the Below URL
A digital version of one of Hitec’s most popular micro servos the HS-5085MG offers excellent centering, resolution and durability for those looking to save weight without sacrificing performance. A popular servo for smaller airplanes, heli’s, boats, cars and trucks, the HS-5085MG offers a fine balance between speed and torque.
Features:
• Standard Servo Performance from a Micro Servo
• Rugged Metal Gears
• Ball Bearing-Supported Output Shaft
• Standard Programmable Digital Circuit
• Stronger Holding Power than the Analog Version
Specs:
Operating Voltage Range (Volts DC): 4.8V ~ 6.0V
Speed (Second @ 60°): 0.17 ~ 0.13
Maximum Torque Range kg/cm: 3.6 ~ 4.3
Current Draw at Idle: 3mA
No Load Operating Current Draw: 290mA
Stall Current Draw: 2150mA
Dead Band Width: 2µs
Dimensions: 29.0 x 13.0 x 30.0mm
Weight: 21.9g
Circuit Type: G1 Programmable Digital
Motor Type: 3 Pole Metal Brush Ferrite
Gear Material: Metal
Output Shaft (type/Ømm): Standard / 24
Case Material: Plastic
Dust / Water Resistance: N/A
Connector Gauge (AWG) / Strand Count: 28 / 20
Programmable Functions:
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Data Save / Load
• Program Reset
Applications:
Parkflyer: <1400g
Sport Plane: 1190g – 1400g
Sailplane: <2m / DLG
On Road: 1/16th
Buggies: 1/16th
Short Course Truck: 1/16th
Power Boat: 1/16th
-
Servo Torque(kg)(min. 0.01kg) 4.30
-
Servo Speed (Sec/60deg) 0.13
-
Servo A(mm) 34.80
-
Servo B(mm) 30.00
-
Servo C(mm) 30.00
-
Servo D(mm) 12.60
-
Servo E(mm) 39.90
-
Servo F(mm) 19.20
