Upgrade your Blade 130X with this great little motor, amazing power and performance and runs cooler due to its air duct design on the rear of the motor.
Input voltage: 2s (7.4v)
Max amps: 12A (20sec bursts)
Shaft diameter: 1.5mm
Shaft length: 6mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Was defective upon delivery. unfortunately only for a star. sorryBought engine, there are threads for the screw 1,4 m
I usually work cinese hurt!!!
are not at all happy never buy moreI installed the tiny CH05XL 8000kV with 11t pinion into the Blade 130X. Much smaller and lighter compared to the stock motor, so you get plenty of space above it for a bigger lipo.
The performance is very close to the stock motor, so its a well balanced setup in my opinion, no brute force machine...
After 8:30 of soft aerobatics (with 800mAh 2s Turnigy) this motor did not get hot at all - so I could directly chance the lipo and continue flying - much better than the stock motor which required cooling down every 5 minutes.
Will just order a 2nd one for my spare heli...I installed it on a walkera v120d02s with a XP-7A ESC. It is wayyyyyyy more powerful than the stock motor. This is hard to believe since it is also a lot smaller and lighter. The power is not outrageous but the heli feels better than the 130x. The motor is less noisy than stock also. Only the high RPM blades sound can be heard.
Worth the (high) price !