The Kim250 Pro FPV Drone is a top-performing quad with an emphasis on proven design, durability and affordability.
The kit has a built in PCB for power distribution for super-slick installation of your chosen esc’s, flight controller and optional FPV gear.
Designing a camera mount into the very front of the frame has allowed for an unobstructed field of view limited only by your video equipment. The alternative top mounted camera/flight controller platform is supported by silicon isolation mounts to eliminate vibration.
Stylish, red anodized frame uprights, G10 composite structure with tough, 5mm thick arms and integrated platforms for your camera and FPV gear make this a versatile and fun multirotor, ideal for 250 class racing and any other FPV antics!
• Strong, G10 composite construction
• Integrated PCB
• Lightweight machined alloy hardware with red anodizing
• Space maximizing layout
• Choice of camera platform location
4 x Motors 2204~2208 1800~2300kv
1 x Battery 1000~1800mah 11.1~14.8V (3~4 cell Lipoly)
4 x Propellers 5~6 inch
4 x ESC 8~18A
1 x multi-rotor flight controller
4ch radio (6ch recommended for FPV and FC use)
FPV gear (optional)
- Blade Count:
Perfect mid sized quad frame. Extra tough since it is make out of carbon fiber,
I was surprised by the building strength of this frame. During the maiden flight I "accidentally" tested the crash-proof of this frame LOL (see youtube: https://www.youtube.com/watch?v=uwgv5QpjOCI&feature=youtu.be). It dropped from a serious height with high speed and it survived. I only needed to rebound the props back to place...
Good quality frame, with good space for equipment.
have not crash tested it yet, but it looks solid.
a small film of the drone.
I am quite satisfied with this frame. Well built. Convenient pdb with ample space for Blue Series 12A allowing for very clean built. Sturdy 5mm thick arm. Able to accommodate 6" props. Motor screw layout is for 16*19 motors (M3), so for Dys BE1806 motors have to make do with 2 screws in and need proper M2 washer. All plates are 1.5mm thick. Suggest for 3mm bottom thick plate if this frame design is revised.