Country
United States
 
Shipped From:
  • UK
  • United States (US)
  • Global
  • Australia (AUS)
  • EU

LD1510A-02-P Micro Brushless Outrunner Motor (16.5g)

LD1510A-02-P Micro Brushless Out...

A powerful, lightweight micro brushless motor that is ideal for those small indoor or even parkfly type models. Nicely machined and balanced, hand wound with thick gauge copper, supplied with X mount, mounting screws, 2mm connectors and prop drive...
244000015-0

Now save save $0.00 $0.00

$11.46
44g
244000015-0


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

A powerful, lightweight micro brushless motor that is ideal for those small indoor or even parkfly type models. Nicely machined and balanced, hand wound with thick gauge copper, supplied with X mount, mounting screws, 2mm connectors and prop driver.

Specs:
Model: LD1510A-02-P
Kv: 2200rpm/v
Weight: 16.5g (with wires and mount)
Voltage: 7.4~11.1V
No Load Current: 0.2A
Max Current: 6A
Max Power: 60 watts
Shaft Diameter: 2mm
Motor Diameter: 18mm
Mount Bolt Hole Centers: 25mm
Mounting Bolt Size: 2mm
Connector: 2mm
Suggested ESC: 10A

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    244000015-0
  • Brand
    N/A
  • Weight(g):
    44.00
  • Length:
    95.00
  • Width
    45.00
  • Height
    55.00
  • Kv(rpm/v):
    2200.00
  • Max Currents (A):
    6.00
  • Power (W)
    60.00
  • Length B (mm)
    18.00
  • Can Length D(mm):
    12.00
  • Max Voltage(V):
    11.00
  • Shaft A(mm)
    2.00
  • Unit Weight (g)
    16.5
  • Diameter C(mm):
    18.00
  • Total Length E(mm):
    28.00
  • Resistance (mh)
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Un campanellino davvero niente male, con elica 4,1x4,1 gira che una meraviglia
Used 2 of these on my JU52 tri motor for the wing motors, also using four of these on my TU95 bear, see gallery. Great motor 10amp controller and 5x3 props.
for the price the value is great, had to balance with a little tape. Use it on a mini popwing with 500ma 3s. nice and fast without being scary (some would disagree). 5x4.5 gws prop.
kleiner kraftvoller Teufel - kein Lagerspiel - guter Rundlauf - mit 2S Lipo plus 5,5x4 Latte im Quadcopter(leinchen) schon sehr agil.
I will start off with they do work and not bad deal for the price, but there are a few issues if you want to use for a multirotor. They have quite a bit of vibration right out of the box, I balanced them and got them running pretty good. Vibrations still showed up on my gyro calibration screen and caused it to fly a little shaky. For 10 bucks really can't ask much, I flew with them for 20 flights and they got too bad to fly to threw them away and moved on to a more expensive motors.
Nice little motor. I am using it on a Firefox glider to RC conversion plane with a 4.5x3 folding prop with a HK 10 amp ESC, on 3s 460 mah Nano tech battery. It REALLY has the juice. AUW is about 125 grams and its nothing to go vertical. Not to mention low pass fly bys are screaming, lol. I found that a 5x3 during tests made the motor hot on 3s. Might cool a little better in the air, but i don't care to risk it. 4.5x3 runs great for my application. i will buy this motor for more planes in that weight range again. Will see how it lasts after a few crashes and multiple flights ;)
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.