These LED strips contain 60 RGB (Red,Green, Blue) LEDs per meter.The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.
This strip is not waterproof.Specs:• 60 RGB LEDs per meter
• Pre-cut to 1m lengths
• Supplied with 4 terminal plug & Fly lead
• CE and RoHS compliant
12volt power source
utiliser dans un cerceau "houla-up" semi-transucide, permet a mon drone d'avoir un anneau lumineux autour de lui tout en assurant la securite. magnifique en vol et agremente du switch permet la selection couleur, ...Very bright and inexpensive. Cutting to length is easy and allows for customization. Careful when soldering not to overheat the pads as they are fragile and may break off. Only issue with mine was the blue 'B' and green 'G' pads are mis-labeled and the white wire from the picture is black but positive. For that price, it isn't much of an issue.Really neat kit,if you want more than red green blue get this with the controller and you will have all you need :)Muy brillantes, funcionan a 12v y se pueden cortar cada tres led para hacer tiras mas pequeas. Se venden con la cinta de doble cara ya pegada por la parte posterior.