Medium Lock On Nylon Control Horn 10pcs
Medium Lock On Nylon Control Horn 10pcs
Copy and Share the Below URL
Lock on nylon control horn for ailerons, elevators, rudders and similiar applications. The backplate pushes over the serrations on the horn and locks it into place, no need for glue.
Specs:
Length of Horn from Base: 18mm
Max Thickness of Control Surface: 6mm
Length of Base: 12mm
Width of Base: 8mm
Material: Nylon
Fixing: Lock on
-
SKU 017000307-0
-
Brand -
-
Capacity (mAh) -
-
Shipping Weight 17.0000
-
Length 50.00
-
Width 15.00
-
Height 30.00
Great value for money and great quality.
Great value for money and great quality.
Good for balsa models too.
Good for balsa models too.
Great horns for the price plus they are the same size for your AXN but stronger !!!! Get them !!!
Great horns for the price plus they are the same size for your AXN but stronger !!!! Get them !!!
These horns are perfect for medium-sized (1m - 1.5m span) Flite Test scratch-built planes like the FT-Spitfire, FT-Mustang, FT-Sea Duck, FT-Viggen, etc... The square plate works like a zip-tie to lock the horn in place. Inexpensive, reliable, convenient. But for smaller planes with a span under 800mm (Like FT-Minis) I use smaller, lighter horns.
These horns are perfect for medium-sized (1m - 1.5m span) Flite Test scratch-built planes like the FT-Spitfire, FT-Mustang, FT-Sea Duck, FT-Viggen, etc... The square plate works like a zip-tie to lock the horn in place. Inexpensive, reliable, convenient. But for smaller planes with a span under 800mm (Like FT-Minis) I use smaller, lighter horns.
great horn with locking feature ,but sill needs a little glue
great horn with locking feature ,but sill needs a little glue
this is a good idea to put horn on wing. I always hated the glued one as there is always a chance they're come off. this is much better
this is a good idea to put horn on wing. I always hated the glued one as there is always a chance they're come off. this is much better
work well for my diy planes and it very cheap compare to market
work well for my diy planes and it very cheap compare to market
very good horn and sometimes can use without glue
very good horn and sometimes can use without glue
squadrette utili per aereo elettrico
squadrette utili per aereo elettrico
I'm going to use this on my bixler 2 to replace the stock ones, which are not glued properly
I'm going to use this on my bixler 2 to replace the stock ones, which are not glued properly
Others Also Bought
-
Nylon & Pinned Hinge 16x28.5 (10pcs)SKU: 008-00201x10
$1.56 -
Nylon Clevis 2x29mm (10pcs)SKU: 12-00503x10
$0.90 -
HXT900 Micro Servo 1.6kg / 0.12sec / 9gSKU: HXT900
$3.05 -
Linkage Stopper D2.1mm (10sets)SKU: 016-00503x10
$1.45 -
Control Horns 16x20mm (10pcs)SKU: 07-00502x10
$1.32
Related Products
-
Large Glue In Nylon Control Horn 10pcsSKU: 017000304-0
$1.16 -
Nylon Clevis 21mm (Original Color) (10pcs)SKU: 017000342-0
$1.15