The Micro HKPilot OSD is full Mavlink and Open source Firmware compatible, and configurable via standard FTDI cable. The Micro OSD is a micro Arduino-based on-screen display board. It's tailored for use with Ardupilot Mega and the MAVlink protocol, and designed to be as compact as possible.
Its main components are an ATmega328P 8 bit microcontroller with an Arduino bootloder, and a MAX7456 monochrome on-screen display. This tiny 28x16mm OSD is perfect for micro sized application, but works just as well with any MAVlink compatible FC and application.
ATmega328P with Arduino bootloader
MAX7456 monochrome on-screen display
Solder jumper for PAL video option
Exposed test points for HSYNC and LOS
Micro OSD * 1
JST 1mm ‘Y’ Cable * 1
Video Transmitter and Camera ‘Y’ cable *1
*Note: This is not an original Arduino brand product.
Great little micro osd .. did a google on how to flash and all was well using ArduCam OSD 188.8.131.52.
I did try other files but things kinda didn't work right (memory issues with firmware not my memory)good OSD work well with crius aiopGood little osd (and i do mean little its tiny)
I have used it successfully with the following OSD Firmwares without issue
flashing was painless for me it seems many others have had issues getting FTDI tool to work but i never encountered any of the problems discussed with this (i use a 5V ftdi that came with a multiwii i got ages ago)
Works very well.
I updated it to R800 with no issues.
It can be configurated all in 2 panels, battery and rssi warnings.
it's a pain in the ass. I have no camera image and information on screen. If I plug the camera directly on the vtx, I have image, but when I plug the osd between both, no image at all. I can't find a manual in the internet. A product like that must have a manual.Good size, but its turn extremelly hot! Works well but I recomend to install it on a place with enought airflow.Really nice OSD, although the cable for plugging into my TX was not OK. I had to solder the solution out.Works great after minimal setup. I highly recommend you buy an FTDI connector so you can update and customize the firmware, so you can configure your screen. They are cheap, so buy one with this unit.Not sure yet what this is going on, but it looks well made and simple to use.