Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Multistar 1807-340Kv Brushless Gimbal Motor for Mobius Camera

Generating Links

Multistar 1807-340Kv Brushless Gimbal Motor for Mobius Camera

Price:

Now save save $0.00 $0.00

$13.55
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9192000219-0
want FREE shipping? Click here to find out more!

The Multstar 1807-340Kv brushless gimbal motor is suitable for small gimbal systems that would be used with the popular Mobius camera. This motor is manufactured to the same high standards that are utilised in the Multistar multi-rotor range of motors. High end 45SH magnets, high quality NMB bearings and high pole counts for smooth operation. Build your lightweight gimbal using this purpose made brushless gimbal motor.

Specs:
Kv(RPM/V): 340Kv
Lipo Cells: 2~3S
Max Power: 5W
Max Amps: 0.5A
No Load Current: 0.01A
Internal Resistance: 10ohms
Diameter: 22mm
Length: 15.6mm
Bolt Hole Spacings: 16 x 16mm
Bolt Thread: M2.5
Weight: 20g
Suggested ESC: Gimbal ESC
Connection: JST ZH1.5

  • Kv(rpm/v) 275.00
  • Max Current (Motor) (A) 0.50
  • Resistance (mh) 10.00
  • Max Voltage (V) 12.00
  • Power (W) 5.00
  • Shaft A(mm) 2.00
  • Length B (mm) 16.00
  • Can Diameter C(mm) 22.00
  • Can Length D(mm) 8.00
  • Total Length E(mm) 16.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 16, 2015

good quality gimbal brushless motor

there is very little slop and the stabilization is rock solid with alexmos board

it needs M2.5 screws, M2 would have been better because of availability

Shurics | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2015

Everything is wrong with this motor!

1. It has 2,5mm holes, why not commonly used 2 or 3mm?
2. Front Hole Spacings is incompatible with any other BG motor. Why so stupid?
3. Cable is stiff and short with useless plug.
4. It has a lot of cogging.

Why RC engineers never can make any easy to use product????

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!