This model is hot!
An 1.4m 3D head-turning machine; this large scale model will surely draw a crowd at any club and demand full respect amongst 3D pilots the world over.
The distinctive and scale scheme is ideal for orientation. The MX2 is large for an model and it looks nearly twice the size once its in the air. Its a blast to fly and is very 3D capable!
The powerful, pre-installed 36-48 motor spinning that large & scale 3 blade prop gives plenty of thrust for the wildest of maneouvers, and the pre-installed servos are certainly up to the job. Generous size control surfaces combined with light weight ensure this is a true performer as well as a head turner. Practical as well as easy on the eye, the wings are detachable for easy transportation, a large canopy ensures easy access to tray, wing bolts and so on.
Flying Weight: 1900g
Wing Loading: 50g/dm2
Motor: 36-48 Brushless
: 70A w/BEC
Servo: 2 x 9g, 2 x 17g
Your Own 4~6 Channel TX/
2200mAh 4s Battery
Amazing plane to fly, out of the box the right aileron servo was completely dead so it was replaced by a 9g hobbyking servo and worked okay after. The elevator control line was much too long to fit into the elevator servo and work so i cut the end of the control line off and attached a linkage stopper to the servo. worked well. rudder is good, could have used an extra hinge at the bottom but its fine without. Motor is powerful and the model can hover with a bit of skill. What annoys me about this model is the lack of spare parts, My elevator failed midway through a manouvre and the model nose dived straight into the floor, breaking the fuselage into three seperate pieces and destroying the left wing. Cant find any replacement parts anywhere online so i guess i have to try to hot glue it and hope for the best. Spares should be stocked for such an aerobatic planeGreat airplane.
Great constrution quality.
Only I need to know what the prop size.Pilotos trago meu relato para evitar problemas com a nave de vocs.
O avio muito estavel,voa muito,porm o bec que veio nele aquecia muito.fiz apenas 5 voos com ele e ai o bec simplesmente queimou.A nave quebrou inteira no tendo possibilidade de arrumar.
fica a dica troquem este bec para no acontecer o mesmo com o de vocs.As a flying model, this mx2 performs beautifully. As a kit, it is average as far as fit and finish goes. Beware - some of the packetted screws are labelled incorrectly. My labelled wing bolts went right thru the bottom of the fuselage, and the vertical tails screws didnt reach the fixing plates.
All in all a great flying model though, Looks great, and very powerful.
It's a really nice plane. Flies really well.looks good flies great i dialed in low rates as im a beginner on this kind of model and it was very twitchy at speed apart from a couple of small issues that can be rectified example
the tail wheel will never line up with the screws so fit it and glue it on
the 2 bags of screws are incorrectly names the tail screws are actually for the wings as they are short the wing screws are long and for the tail get them mixed up and assembel as the manual says the ing screws will come out of the fuse and the tail screws will not reach to hold in the tail. One other thing under the canopy top side of the fuse is very weak and easily breaks on a bouncy landing. other than that if you follow this review you should be great to fly it over and over.Everything on this plane is great. I Maidened it at the club the other day and it flew great. I has an amazing presence in the air and looks stunning. Also landings are very simple and require not to much skill. The only problems I noticed was one or two screws need to be tightened on gear and other things so check those and on my tail wheel the pushrods where about a 0.75 centimeters to long which I fixed by just using some thin metal cable. Overall its a great flying plane that I highly recommend.
p.s I use a 2200 mah battery and it flys fine.After all the hassles I've had with this and other supposedly top end planes from Hobbykings, there will never be another.
Other planes from other suppliers might appear more expensive but after you replace faulty motors, servos and wiring as well as basically rebuild the plane to airworthiness, the cheapness if HK models ruins the experience.
I'll never buy another plane from Hobbykings.
MX2 Green 3D 1400mm EPO
MX2 Green 3D 1400mm EPO
MX2 Green 3D 1400mm EPO (PNF) Plane Chase
MX2 Green 3D 1400mm Plane Chase
MX2 RC plane EPO_Hobby King (first flight)
MX2 EPO RC plane Hobby King à Levens
MX2 EPO RC plane Hobby King + camera HD inside_aerobatic flight
MX2 (Suppo) ESC manual download now [24kb] MX2 Manual (slightly out of date - says download now [2849kb] pOOR SERVOS ON NEW VERSION download now [165kb] Speed Controller Programming Instruction download now [24kb] mx2 compatible esc manual download now [24kb] #3 download now [501kb] #4 download now [547kb] inside download now [359kb] Tail mod to lighten the tail end download now [343kb] MX2 ready for takeoff download now [530kb] #2 download now [291kb] MX2 Manual download now [2849kb] Replacing the propeller. download now [418kb] Replacing the propeller. download now [418kb] Replacing the propeller download now [319kb] Re Built Fuselage download now [847kb]