XT60plus with Insulating End Cap (Male & Female) (5set/bag)
XT60plus with Insulating End Cap (Male & Female) (5set/bag)
Awesome!
Copy and Share the Below URL
The new XT60+ is here! With "snap on" insulating end caps to provide the best polarity insulation for your soldered connections, these are sure to become the most popular battery connector for hobbyists.
The basis of the original robust XT60 design has been retained and the connector is compatible with the original XT60, but now thanks to the snap on end cap there is no need to use heat shrink and the ridged edges on the end cap provide extra grip when pulling the male and female connectors apart.
Initial assembly requires a little force to clamp the end cap in place but please note that the end cap is hard to disassemble once it has been installed. Should you wish to remove the end cap you will have to "break it" with both hands to get it to release.
These are genuine AMAAS connectors and are quality products, our customers should beware of imitations in the market that do not meet these standards.
Specs:
Material: Gold-plated copper
External Material: Nylon/PA
Max. RC/MC: 60A/100A
Weight: 7.72g
Pulling Force/600: 3kg
Temperature Resistance: -20°C~120°C
Recommended Cable Spec.: 12AWG
Recommended Soldering Spec.: 480°C/4S
Includes:
5 sets of male and female plugs
IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."
-
SKU 015000241-0
-
Brand -
-
Capacity (mAh) -
-
Shipping Weight 46.0000
-
Length 80.00
-
Width 20.00
-
Height 70.00
Nice connectors. The protective cap that locks onto wire end snaps on hard and stays on solid. Tin the solder ends first then solder the wires on. The connector plastic tolerates much more heat during soldering than most other brands. The key is to learn a proficient method for soldering to minimize heating times.
Great product!
Nice connectors. The protective cap that locks onto wire end snaps on hard and stays on solid. Tin the solder ends first then solder the wires on. The connector plastic tolerates much more heat during soldering than most other brands. The key is to learn a proficient method for soldering to minimize heating times.
Great product!
High quality plastic, doesn't deform during soldering. Gives good grip for fingers so stresses the cables less, I find.
High quality plastic, doesn't deform during soldering. Gives good grip for fingers so stresses the cables less, I find.
Good so far recommended
Good so far recommended
Good so far recommended
Good so far recommended
High Quality! Doesn't discolor or melt when soldered!
High Quality! Doesn't discolor or melt when soldered!
Superb bit of kit ...the clip on piece make getting the plugs seperated so much better ... These solder very well ...overall a 5* product .
Superb bit of kit ...the clip on piece make getting the plugs seperated so much better ... These solder very well ...overall a 5* product .
Easy and quick to solder. No need for heat shrink with the securely locating covers.
Easy and quick to solder. No need for heat shrink with the securely locating covers.
super stecker sind gut zu verarbeiten und sehr pasgenau echt TOP..
super stecker sind gut zu verarbeiten und sehr pasgenau echt TOP..
XT60plus with Insulating End Cap (Male & Female) (5set/bag)
XT60plus with Insulating End Cap (Male & Female) (5set/bag)
These new XT60plus plugs are nice. I like not having to use heat shrink now and by the way, you can remove the black insulating cap without breaking them as described in the description above. Just takes a little strength and bend them from flat side to opposite flat side to remove.
These new XT60plus plugs are nice. I like not having to use heat shrink now and by the way, you can remove the black insulating cap without breaking them as described in the description above. Just takes a little strength and bend them from flat side to opposite flat side to remove.
Others Also Bought
-
XT60 Charged/Discharged Battery Indicator ...SKU: 9171000693-0
$3.04 -
XT60U (XT60 Upgraded) Male & Female (5...SKU: 015000258-0
Special Price $3.32
You save $1.33
Was $4.65
-
Turnigy High Quality 12AWG Silicone Wire 1...SKU: 171000715-0
$2.34 -
$4.41 -
Turnigy High Quality 12AWG Silicone Wire 1...SKU: 171000714-0
$3.15
Related Products
-
XT60plus with Insulating End Cap - Male (5...SKU: 015000242-0
$2.83 -
Turnigy High Quality 12AWG Silicone Wire 1...SKU: 171000715-0
$2.34
-
MultiStar Fire Retardant LiPoly Battery Ba...SKU: 9487000014-0
$3.47 -
(3S) 4 Pin JST-XH Balancer Connectors Male...SKU: 015000228-0
$1.20 -
XT60plus with Insulating End Cap - Female ...SKU: 015000243-0
$2.83 -
Turnigy High Quality 16AWG Silicone Wire 1...SKU: 171000728-0
$1.28 -
Polyester Hook and Loop Velcro (100mm x 1m)SKU: 115000001-0
$2.63