Total Price

$0.00

Cart 0 Cart 0 Loading...

Emax Nighthawk Pro 280 FPV Racing Drone (P&P)

Generating Links

Emax Nighthawk Pro 280 FPV Racing Drone (P&P)

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
045000044-0
want FREE shipping? Click here to find out more!

The Emax Nighthawk Pro 280 has been purpose designed for FPV Racing.  Constructed from carbon and glass fiber, this plug and play version comes with the new Skylight 32 fully integrated flight control board with four 12Amp BLHeli speed controllers, each driving a powerful EMAX 2204 2300 KV motor.  With a 10 degree tilt on the motors mounts greater forward speeds are possible without sacrificing elevation and that is exactly what you need for FPV racing!

The Nighthawk Pro 280 includes a 700TVL camera with optional tilt mounts to ensure you have a perfect horizontal view in flight and a 20mw-200mw video transmitter with a selectable switch, allows you to choose the output power of your transmitter. 

The Nighthawk Pro280 is an outstanding FPV Racing quad and is ideal for those looking to get into the most exciting, RIP IT UP!! with the most fun you will ever have with RC.

Features:
• Strong, durable and stable frame
• Prebuilt frame and extra accessories
• Powerful EMAX power system
• Open source flight controller
• Bright LED to distinguish from other quads when racing
• Plug and play, connect your own battery and radio gear and you are good to go.
• Software and firmware upgrades possible
• Flight controller use 32bit ARM micro processor for fast process speed and fast response
• Gyroscope, magnetometer and accelerometer and barometer expansion port
• With CPPM receiver GPS feature can be enabled. (GPS module sold separately)
• Supports ANGLE, HORIZON, HEADFREE, MAG, HEADADJ ...etc modes.
• Supports RC Input: standard signal, CPPM (PPM SUM) signal, PWM signal.
• NAZE32 Skyline32 supports open source configurator Baseflight and Cleanflight
• Extra power output and power output switch for LED expansion.

Specs:
Wheelbase: 280mm
Flight Weight: 440g (Without Battery)
Frame Size: 252mm*260mm*75mm
Motor: MT2204
ESC: BLheli 12A 4in1(Integrate on board)
Propeller: 6045
Flight controller: Skyline32 (Integrated on board)
FPV transmitter: 20mMW/200mMW
Antenna: 5.8G Clover 3 Blade Antenna Straight Connector
FPV Camera: 1/3-inch CMOS

Required: (Not Included)
Battery: 3S~4S 1500-2200mAH 30C
Your own Transmitter and Receiver

Includes:
1 x Nighthawk Pro 280 FPV Racing Quad

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

whipper Snapper | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 20, 2016

I usually build my quads....but this is my first 4 cell powered one (my other ones being 3 cell) Heard lots great reviews on other forums too about htis quad...got it when it was on special price of 246....with free shipping man what a deal it flies so well and so stable yet super fast and powerful...camera and all works great all I did was change the LHCP antenna to RHCP antenna as my fatsharks are using RH other than that its running on the 4 cell setup and it goes nuts!!

bärse | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jun 04, 2016

A big disappointment after all the hype.

1. Screws are the usual chinese crap. Tried to change the upwards-looking camera mount but was not able to tighten it because the srews were so soft and crappy metal that the end that meets the driver went round.
2. When tried to change the video TX power from 20mW to 200mW the - crappy again! - little plastic notch broke before the selector moved at all.
3. What is worse, the video TX channels are wrong on the manual so even after one frustrating evening of trying to get the image into my Skyzone AIO googles I am left without image.

All in all this is what chinese crappy RC products used to be a few years ago. If you want to get angry and frustrated, buy this.

dc3t_driver | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 04, 2016

If you are looking for a hassle free experience in RC Quads then look no further. Emax have done it all for you in the Nighthawk Pro 280. About 30min of really basic setup and you are flying.

One of the most stable ARF's on the market. Flick a switch and you are flipping and rolling in no time.

Highly recommended

CMANERO | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 17, 2016

Excelente producto. Muy buena Calidad y buen montaje de la electronica.
lo compre y arrivo en 7 dias por Fedex !!!!
Excelente HobbyKing !

Chrissy47 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 10, 2016

I'm stoked with this quad. Straight out of the box and into Cleanflight after adding my RX and it flies really well. Good solid construction with plenty of accessory parts for adding lost model and battery alarm etc. I have modified the frame but it wasn't necessary, it was more to customize. The FPV setup is great as is. It is probably 50 to100 grams heavier than some of the other expensive 280 options available but has plenty of grunt and is simple and complete. I'm running 3S 2200 on the supplied props. I was fortunate to get it when it was on sale for $110 but it's still worth the money at the normal price for a good intermediate quad. Mark

Aadvark | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 08, 2016

Product arrived all pre-assembled. All you have to do is screw the antenna on, plug in your receiver and set it up in cleanflight. Flies really smooth. Very sturdy construction, this thing is definitely not going to fall apart any time soon! The Gopro/mobius mount works well, just used a velcro strap to hold the gopro on. Nice clean image through the board cam and transmitter. The light bar on the back is very bright (4W I think). I have already smashed this thing into the ground and only a broken prop. no damage to the frame at all! Really great quad for anyone (beginner to advanced). looking into adding an OSD but it is harder than it looks with the all-in-one PCB! Shipping to AUS was good (about 10 days). I run nano-tech 1800mAh 3S 25-50C and get a little over 8 mins flight time.

Customer files
Manual de Instrucciones Download [511]
Manual de Actualizacion de Firm Download [511]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!