Country
United States
 
Shipped From:

NTM Prop Drive 28-36 1800KV / 438W

NTM Prop Drive 28-36 1800KV / 438W



NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way th...
NTM2836-1800

Now save save $0.00 $0

$17.77
OUT OF STOCK
98g
NTM2836-1800

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Overview
NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.
Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory(our) prices! All performance figures are real and tested on our own motor dynos.
Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse.
 
Specs:
Model: NTM Prop Drive Series 2836 1800kv
Kv: 1800rpm/v
Poles: 3
Motor Wind: 9T
Max current: 30A
Max Power: 438W @ 15v (4S)
Shaft: 4mm
Weight: 84g
ESC: 30~40A
Cell count: 3~4s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector

Prop Tests:
5x5 - 11.1v - 123W - 11.1A 
5x5 - 14.8v - 303W - 20.5A
6x4 - 11.1v - 182W - 16.4A
6x4 - 14.8v - 438W - 29.6A

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Diameter X(Inch)
    No
  • Torque(kg)(min. 0.01kg)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    NTM2836-1800
  • Weight(g)
    98.00
  • Length:
    100.00
  • Width:
    30.00
  • Height
    60.00
  • Kv(rpm/v)
    1800.00
  • Max Currents (A):
    55.00
  • Power (W):
    438.00
  • Length B (mm)
    36.00
  • Can Length D(mm)
    25.00
  • Max Voltage(V):
    15.00
  • Shaft A(mm):
    4.00
  • Unit Weight (g)
    84
  • Diameter C(mm)
    28.00
  • Total Length E(mm):
    56.00
  • Resistance (mh):
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Turns props just splendidly
Using it on a scratch built depron F22A by Thome, prop TGS 7X5, Zippy 2200mAh, 30A esc, NTM accessory pack.
Finally I have the requested power on this jet, it rocks!
Quality is not superb, only 6 magnets inside, but it works pretty well.
Only few flights yet, so no opinion on durability and reliability.
Hugely impressed with this motor, effortless power on 3s or 4s. I've used it for two applications, a scratch built plane and an airboat; it's been perfect for each...very versatile.

arrivato senza doppio supporto (possibilita' di montare l'elica posteriormente)
I'm not happy for this motor.
It arrived with the two bearings defeacted and I can't fly with my bixler II.
Where is the quality control?
This thing is POWERFUL. If you need a large motor to drive a small prop, this is the one. This motor plus a 6x5 prop can propel a many pound Airsoft surveillance plane that I built easily.
good motor but not very well balanced
moteur puissant et de tres bonne qualite
It's pretty good, not the power house I was hoping for. Goes hard on 3s with a 7x6 apc prop but I can't seem to prop it right for 4s. Performance is lack luster with a 6x5, plenty of speed but not the aggressive drive I want. Very powerful on 7x4.5 but it comes down HOT. If I can find a good, thin 7x4 graupner that will probably be where it's at and I'll let you know. Worth the money and a big upgrade from the stock hk racer motor!
toto je super tovar a este aj za dobru cenu,ktroy pouzivam uz hodne dlho a som s ni m nadmieru spokojeny,takze vrelo odporucam kupovat.sssc
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [195kb]
No File Name download now [426kb]

Combine

essential items and
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.