Total Price

$0.00

Cart 0 Cart 0 Loading...

NTM Prop Drive Series 28-30 1100KV Motor

Generating Links

NTM Prop Drive Series 28-30 1100KV Motor

Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9171000280-0
want FREE shipping? Click here to find out more!

NTM Prop Drive motors are rock-solid performance outrunners with tight windings, quality bearings, correctly rated magnets, balanced stator and flux rings plus they are QC checked at 14 points, from material processing all the way through to final dyno test.

 Because we design and build these motors completely in-house (from 3D/2D drawing to materials sourcing, machining, balancing, final assembly and dyno) we can completely control production and ensure product consistency from design right through to shipping the product to you. The removal of middle-men has meant we can drive better value to the market and retail these motors at factory (our) prices! All performance figures are real and tested on our own motor dynos.

Perfect Kv and size for quadcopters!

Our QC engineers check and balance each motor before shipping to the HobbyKing.com warehouse. 

Specs:
Model: NTM Prop Drive Series 28-30A 1100kv
Kv: 1100rpm/v
Max current: 26A
Max Power: 289W @ 12v (3S) / 385W @ 15v (4S)
Shaft: 3mm
Weight: 68g
ESC: 25-30A
Cell count: 3s~4s Lipoly
Bolt holes: 16mm & 19mm
Bolt thread: M3
Connection: 3.5mm Bullet-connector
Suggested Prop: Prop test data coming soon!

Note: An accessory pack is available for this motor. Please see the related items below. 

  • Kv(rpm/v) 1100.00
  • Max Current (Motor) (A) 26.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 15.00
  • Power (W) 385.00
  • Shaft A(mm) 3.00
  • Length B (mm) 30.00
  • Can Diameter C(mm) 28.00
  • Can Length D(mm) 19.00
  • Total Length E(mm) 45.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Wolfgang | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Sep 06, 2016

I installed that Motor on the Phoenix 1600 with stock propeller (i believe it is 10*6) and a 3S Lipo.
It worked very well for some Time (approx 2-3h airborne Time in Total). Two days ago one of the three bullet connectors broke. I resoldered but on the the next day the motor burned down.
I used it within the specifications (according to my wattmeter it drained 22 amps at full throttled with a fully charged 3s lipo).
I also always checked that the propeller was not blocked in some kind of way.

I ordered a second one. Let's see how the other one works out. The time it was running i was almost perfectly satisfied. It got a little bit hot however.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 18, 2016

top motor i use epp sbach 1100

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 13, 2016

Gewicht 67,55g mit Kabel inkl. 3,5mm Goldkontaktstecker 7cm lang, freie Motorachse 13mm, Durchmesser 3mm, Motorlaenge 32mm ohne Achsueberstand, Durchmesser 28mm, Befestigungsloecher 19/16mm M3

Airborone | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Feb 27, 2016

Bought it for my Reichard Cumulus 2,5m F5J glider.
I use a 9x5 folding carbon prop.
Pulls 20A of my 800Mah 3Cell battery.
It can climb almost vertically....
Very happy with the Motor..

zen88 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 10, 2016

motore testato a 3 celle con elica 10x7 buone prestazioni e regime costante, a 4 celle inizia a essere un po troppo spremuto e i cuscinetti non durano a lungo, forse di scarsa qualit

Scott | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Oct 01, 2015

Motor has bad bearings right out of the box. At slow speed, there's a loud "clunk, clunk, clunk" and is out of balance. At higher RPM, it seems a little better but not so happy with the quality.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 08, 2015

super Motor, Zubebr mu extra Bestellt werden, kein Halter, keine Schrauben!!

Marco | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 29, 2015

I have built it in my VMAR Piper L4 GRasshopper with an 30A ESC 10x6 Master Airscrew 3S 2200mAh the weight of the plane was about 900g. This Setup was enought to do Knife Edge, Turns and Loops but it needs good cooling but was always a way too hot in the Summer times. So I decided to buy an 28-36 1200KV which suits much better, enough Power to tow an 1kg Sailplane.

rusty54 | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 23, 2015

Use these motors on my 450 size quads and 500 size hex's.

the bearings are smooth allowing the motor to run efficiently

damion | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 18, 2015

This motor is ment to be for multi rotors but I put it on a 3d plane with a 4 cell and it takes off with 1/3 of throttle giving me 300 watts with a 10x4.7 prop.this motor is built well and has plenty of power for such a small size

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories