The OPLink Mini Ground Station is a radio transceiver backed by an ARM32 powered digital packet processor specifically designed for the Open Pilot project. It was originally developed under the codename PipXtreme and there are many artefacts remaining within the CPU architecture that reflect this.
It is a two-way radio system allowing real time telemetry information to the ground control station, wireless configuration and radio control from your transmitter over a single communications link.
Two OPLink radios are required to establish a connection between the vehicle and ground station. The Revo flight controller (PRODUCT ID: 571000065-0) has an OPLink built in. The same firmware version must be running in Revo and OPLM devices (i.e. if you upgrade one board, you will need to upgrade all others that are 'bound' together.)
The OPLink unit operates at 433 MHz so this band cannot be used for vehicle control at the same time using a separate 433MHz radio control system. If you wish to use a 433 MHz transmitter for vehicle control, then you can use an OPLM which will by default, enable the transmission of telemetry.
• Robust 433MHZ RF link
• Versatile 2-way system
• Data telemetry
• Vehicle control
• Compact, lightweight unit
Input Voltage: 5V DC
RF Output: 100mW
Ports: Micro-B USB, Mainport & Flexiport
Antenna Connector: MMCX
Dimensions: 20mm x 29mm
OpenPilot OPLink Mini w/ Case
Antenna and Antenna Extension cable
Full configurations instructions can be found in the OpenPilot manual:
The case it comes in isn't he greatest thing ever, but its light and does the job, but I still replaced it with a shrink tube. Inspecting the board didn't reveal any obvious faults, the soldering was nice and clean, I'm happy with it. With OpenPilot now missing in action, I loaded LibrePilot firmware which also works fine, had no problems setting it up for telemetry and control. The included wires are really soft (softer than I'd like) but whey seem to do the job prfectly fine. All in all a good product, it gets 5 stars.I use with my revo flight controller. This card so good. I m use for vechle controll. This best choose..
everything is holding out on the ZMR
This ain't original, but a neat clone,Works very well and easy to set up, very flexible in terms of applications.