The OuterLimits is a beautifully finished fiberglass offshore racing boat that is built for speed. It not only looks the part, it has the performance to back it up!
The fiberglass work is top notch, making for a smooth finish without flaws. The paint and decals have been expertly applied along with a final glossy clear coat to seal the surface. The color scheme is bright, sharp and highly detailed.
Performance is really what the OuterLimits is all about. The pre-installed 3660 sized 2070KV brushless motor provides huge amounts of power to the prop. A full set of top quality hardware comes as standard including an alloy strut mount, propeller adapter, rudder and turn fin. The motor comes pre-fitted with water cooling installed.
A battery mounting plate is pre-installed as well as a servo mount. The servo simply zip ties in place making for a very easy yet secure installation. The battery tray is large and will accommodate a wide range of pack sizes.
• Beautifully finished fiberglass hull
• Authentic race inspired paint scheme
• Powerful 3660 2070KV brushless motor
• Capable of extreme speeds
• Top quality hardware included
Hull Length: 870mm
Motor: 3660 size 2070KV brushless inrunner (pre-installed)
90~125A brushless watercooled ESC
Standard size 3kg+ servo
2CH transmitter and receiver
3~4S 3000~5000mAh lipoly battery
Thank you hobbyking ! great service,.
Premiere commande avec hobbyking,
et je suis surpris, livraison en 3 jours, incroyable,
très bon service, emballage parfait,
quand au produit, le bateau est trés bien en rapport avec le prix,
il demande des modifications en fiabilité de coque, la peinture est sympas,
mais un bon vernis en surplus permetrait de la rendre quasi parfaite,
la encore comptenue du tarif, c' est royale
le gouvernail est trop court, l' arbre de transmission est a revoir égallement,
le bateau a un fort potentiel, merciThis is freakn awesome Hobbyking.. Built beautifully.
Coming from an qualified graphic designer/Sign writer the decals are professionally applied. Really love how the silver is sprayed on and not a sticker.. Thanks Hobbyking..
Top notch finish, super paintjob. I run it on a Seaking 90amp watercooled esc on 5s will try 6s later on. I ordered a turnfin for the other side. A downside is, you have to remove the motor to grease the driveshaft.Top notch finish, super paintjob. I run it on a Seaking 90amp watercooled esc on 5s will try 6s later on. I ordered a turnfin for the other side. A downside is, you have to remove the motor to grease the driveshaft.Top notch finish, super paintjob. I run it on a Seaking 90amp watercooled esc on 5s will try 6s later on. I ordered a turnfin for the other side. A downside is, you have to remove the motor to grease the driveshaft.brilliant boat beautiful finish super fast on 4s excellent customer service.It's a very well made boat, superb finish. Antenna tube will need to be fitted own self. Would be nice to have the fins on both sides as this only come with 1. http://www.hobbyking.com/hobbyking/store/__22974__47mm_Turn_Fins_Set_L_R_OuterLimits_Smash_Shark_Offshore_Racing_Boat_1set_.html. This esc is a perfect match especially when it comes to bumping up a 5s or 6s with a 1900kv motor in future. http://www.hobbyking.com/hobbyking/store/__75376__Turnigy_XK3674_1900KV_Brushless_Inrunner.html
Coupled with cooling jacket http://www.hobbyking.com/hobbyking/store/__76088__Turnigy_XK_Brushless_Motor_Water_Cooling_Jacket_3650_3660_36_40mm_Purple_.html. But changing motor may need a trimming down of the motor shaft off by 1mm or 1.5mm. I found that the motor mounting screws are slightly off from the mounting plate, so to solve this ,shim down the motor shaft or drive cable shaft.Sehr schnes modell. Habe einen Marine 120A regler verbaut und es luft sogar mit 6S;)
setze demnchst mal ein video rein wenn wir am see waren.Kann es nur weiterempfehlen!First run was in all stock, nothing was changed and used 3S batt, but this 38mm prop did more cavitation and boat not started run very well. Next,boat lose stability, when boat going in turns, if speed will be high you can flip over the boat. After few days of running, i had collision with another boat right on the center of left board, it not was very strong punch, body of the boat was split in two pieces, and that was final... back to the work shop for repair. So as total i made many, many modification in the boat, to force she running pretty good. Now she go 74 km/h (all new: motor 3674 2650KV, ESC Turnigy 180A, longer rudder 130mm, 2-bigger turn fins 55mm, two trim tab, 442 actura prop and 4S Nanotech). next i will use 5S and i guess got more speed. Good luck to all!Excellente, c'est mon premier bateau rc et je ne suis pas du. Qualit excellente. Trs bien fini esthtiquement. Et trs performant, je l'ai test en 4s 5s et 6s je recommande en 5s avec un bon variateur 180a. Trs stable grande vitesse. Le colis est trs bien emball et la livraison de l'entrept europen jusqu'au nord de la France a mit 3 jours pour ma part. Je recommande cet achat si vous voulez un beau bateau performant.