Total Price

$0.00

Cart 0 Cart 0 Loading...

Matek PDB-XT60 w/BEC (5V and 12V)

Generating Links

Matek PDB-XT60 w/BEC (5V and 12V)

Price:

Now save save $0.00 $0.00

$5.90
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
090000026-0
want FREE shipping? Click here to find out more!

Matek PDB-XT60 w/BEC (5V and 12V)

This Power Distribution Board has been engineered to provide the highest possible performance and reliability in a 36x50mm, 4 layer PCB. It comes with an XT60 for easy connection to LiPoly batteries.

Using BECs it distributes power from 3~4S LiPoly packs to 6 ESCs, as well as providing synchronized and regulated DC 5V outputs for RC Receivers, Flight controllers, OSD, and Servos. It also provides linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.

A great package to get your Racing Drones powered up and racing.

Features:
• 2oz copper, 4-layers and 1.6mm PCB
• Built-in XT60 Socket
• Total 6 pairs ESC solder tabs are fit for H or X type frame
• 5V and 12V Output LED indicators
• Regulated 5V and 12V outputs
• Short circuit tolerant

Specs:
Input voltage range: 9 - 18V DC (3S-4S LiPoly operation)
Output continuous current: 25Ax4 or 15Ax6
Output Peak current (10 seconds/minute): 30Ax4 or 20Ax6
BEC 5V output: 5V/2A (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn= 16V, VOut= 5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output (4S LiPoly, 13~18V DC): 12V/500mA (Max.0.8A 5s/minute)
BEC 12V output (3S LiPoly): =3S LiPoly voltage - 1V
Dimensions: 36 x 50 x 4 mm (without XT60)
Mounting: 30.5 x 30.5mm, Φ3mm
Weight: 7.5g (w/o XT60), 11g (w/ XT60)

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Wagner Augusto de Godoy | Verified Buyer

  • Quality
  • Overall
  • Value

Best PDB ever !!!

Nov 06, 2019

super recomend , best pdv ever !!!!

Wagner Augusto de Godoy | Verified Buyer

  • Value
  • Quality
  • Overall

Excelent PDB

Sep 30, 2019

Best price, good materials

Ada | Verified Buyer

  • Quality
  • Overall
  • Value

Good

Sep 29, 2019

Very good board, never had a problem.

lulu | Verified Buyer

  • Quality
  • Overall
  • Value

tre bonn produi conseie a tous

Apr 18, 2019

trie bon état

John | Verified Buyer

  • Overall
  • Value
  • Quality

No issues

Mar 12, 2019

Provides the current needed for a tricopter on emax 2300kv motors.
No issues at all, dosent seem to generate any heat so that's a good thing.
The battery pad is a little awkward to solder to because its just a hole, but it works.
The ESC pads are perfect,spaced apart enough you should touch something that should be touched.
Definetly will be buying more when i build more muiltirotors

Nicolas | Verified Buyer

  • Quality
  • Overall
  • Value

Nice PDB, no issues

Jan 11, 2019

I used this on my first built. The first one I screwed up by soldering the connector the wrong way, thanks to a 10 hour work shift before. Ordered two more as possible replacements and they work perfectly. Only issue I have is that I have the connector facing sideways because of spatial problems. Still works great though

Stanislav | Verified Buyer

  • Overall
  • Value
  • Quality

Great PDB

Jul 02, 2018

Its super well build, only if pads for xt60 connector would go 2mm furter then it would fit on my setup perfectly this way its little sideways but no complaints :D

Connor | Verified Buyer

  • Value
  • Quality
  • Overall

Great PDB

Apr 08, 2018

The PDB I got was very high quality and soldered together very well. All the connectors I used (ESC, 5V, GND, 12V, GND, VCC, GND) worked like a charm. The included XT60 connector solders on well (just make sure to heat up the pad a bit before attaching the power connector since you'll use a lot of solder). When using my multimeter to check for continuity, there was none between the XT60 + and 5V, & 12V, don't worry, it still works.
I use a 3C, 1400mAh LiPo battery and everything works well.

Tomi | Verified Buyer

  • Overall
  • Value
  • Quality

5/5

Aug 08, 2017

nice

Dan | Verified Buyer

  • Overall
  • Value
  • Quality

Good price and quality

Jan 06, 2017

Using with OP CC3D, DYS SN20A, Cobra 2204 2300kv. All works fine. No failures to date.

  1. 1
  2. 2
Customer files
PDB-XT60_Manual_EN Download [2041]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!