Prop adapter to suit 6.0mm motor shaft (collet)
Prop adapter to suit 6.0mm motor shaft (collet)
Awesome!
Copy and Share the Below URL
Prop adapter.
Prop is held with large nut, while shaft held securely in place with a thick collet adapter.
Made from anodized alloy.
-
SKU JY6.0
-
Brand -
-
Capacity (mAh) -
-
Shipping Weight 79.0000
-
Packaging Length 58.00
-
Packaging Width 22.00
-
Packaging Height 34.00
Very nicely made, quite solid, I fitted a 12x5 MA s2 prop on mine with a 60mm white nylon spinner, there is a nut inside the small alloy spinner which tightens the prop on, the larger props don't allow this alloy spinner to go back on because the props are quite thick around 10mm? so maybe buy a plastic/alloy spinner to cover the nut, other than that a great solid prop adapter.
Very nicely made, quite solid, I fitted a 12x5 MA s2 prop on mine with a 60mm white nylon spinner, there is a nut inside the small alloy spinner which tightens the prop on, the larger props don't allow this alloy spinner to go back on because the props are quite thick around 10mm? so maybe buy a plastic/alloy spinner to cover the nut, other than that a great solid prop adapter.
Toller Adapter, gute Qualitaet, super Preis
Toller Adapter, gute Qualitaet, super Preis
Using with donkey 820kv motor & holds a 13x8 prop.
Very strong
Using with donkey 820kv motor & holds a 13x8 prop.
Very strong
Perfect!!! great!! thanks HK
Perfect!!! great!! thanks HK
Got a motor that needs a shaft adapter??? Why shop anywhere else than HobbyKing!!! Great prices and excellent quality parts.
Got a motor that needs a shaft adapter??? Why shop anywhere else than HobbyKing!!! Great prices and excellent quality parts.
Works great but the metal is a little soft, had one that was out of round
Works great but the metal is a little soft, had one that was out of round
wished it had a nut to secure it a little better but still works great, tested on KB45 1200kv with 8x6 prop on 4s batt, havent put on a plane yet but excited to see what it can do
wished it had a nut to secure it a little better but still works great, tested on KB45 1200kv with 8x6 prop on 4s batt, havent put on a plane yet but excited to see what it can do
Propeller nut is not with mm thread, so dont loose the nut.
Propeller nut is not with mm thread, so dont loose the nut.
Excellent adaptor. As well as using these for 6mm shafts I also buy them just for the rounded nut which has a 8mm thread. Using these on elec planes provides the required spinner (small rounded nut) adn then lets lots air-flow into the motor, thus enabling larger currents.
Excellent adaptor. As well as using these for 6mm shafts I also buy them just for the rounded nut which has a 8mm thread. Using these on elec planes provides the required spinner (small rounded nut) adn then lets lots air-flow into the motor, thus enabling larger currents.
ndwnunbaykKJSHDGYHAJSKJHGACJHUDCJK
ndwnunbaykKJSHDGYHAJSKJHGACJHUDCJK
Others Also Bought
-
Corona DS339HV Digital Metal Gear Servo 5....SKU: 014000004
$9.79 -
HobbyKing YEP 80A (2~6S) SBEC Brushless Sp...SKU: 9351000017
$47.64 -
Aerostar Composite Propeller 12x6 Grey (CW...SKU: 074000045
$2.63 -
Aerostar Composite Propeller 14x7 Grey (CW...SKU: 074000041
$3.86 -
Cable Ties 160mm x 2.5mm White (100pcs)SKU: 017000454-0
$1.04