Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Quannum drive 36-55 5mm Shaft 1345kv 45A

Quannum drive 36-55 5mm Shaft 1345kv 45A

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
250 g
SKU:
QD3655
Product
Description

Quannum Drive 36-55
High power brushless motor.
Weight: 220grams
Dimension: 36mm X 55mm
Shaft diameter: 5.0mm
Phase: 3
Pole: 6
Resistance: 0.03
Inductance: 0.008mH
No Load Current: 1.0A
Load Current: 50A
Turn: 2
Average voltage: 24v
Max Voltage: 28v

Miljenko Test Data.
http://www.hobbyking.com/community/forum_posts.asp?TID=98

Product
Specifications

Additional Information

  • SKU:
    QD3655
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    250.00
  • Length:
    0.00
  • Width:
    0.00
  • Height
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor! I use it in a 1/8.5 scale Mig 3 with a 3s pack and replaced an old ultra 900 on 8 cells with it. Weight went down and performance jumped forward! 460Watt peak, +/- 420 mid flight, turning an 8.5 x 7 prop. Everything stays cool, no heating problems at all. I'll defenitely buy another one for my next warbird!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Perfect replacement for a 600 class motor.

Very good quality, all I can say is that I ordered a second one.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
!!!!!!!kick @#$$!!!!!!!!!

I have this in a ripmax spitfire "600".

it goes in the stock mount with just a small amount of sanding ,performance is outstanding getting 490 watts on 3 cells (hextronic of course)turning a 10x5and right at 400 with a 9x6 . i just recieved a couple of 4 cells will try them next....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor makes it easy to have a brushless GP Super Sportster EP by just adding spacers and bolting it in. With a 10 inch prop on 3 good cells it will go straight up in near silence and flys good at half power. It's a great combination.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very good motor I,m using it in a jet propelled boat coupled to a 80amp ESC with 12 cells and it screams I dont know why people would even buy brushed motors at this price you could have ten regards shayne
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great motor for direct drive replacement of 600 class brushed motors. It will fit right in the clamshell mounts for that motor. Power is awesome! I was getting right at 450 watts static with an APC 10x7E and 3S battery. I went down to an APC 9x5E for about 350 watts static. This will make a 2-3 lb plane jump off the ground with plenty of power. Highly recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor with good air cooling circuit.



Open circuit current at 24v was 2.28A. In our application, it could run continuously on 7S LiPos, drawing 43.5A, 1.06 kW, spinning at 29200 rpm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered the Quannum drive 36-55 5mm and received the Quannum drive 36-70 5mm, along with a H-Wing Pentium 60 amp ESC. with The Quannum drive 36-70 drew only 32 amps with 12x6 prop, so I moved up to 13x6 APC e-prop and 6 AH Emoli 3S2P to fly my 40 size 50 inch Se5a biplane fly with good power for approximately 10 min.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I hoped this motor would be a good option for a Century Swift. On 4S and a 9T pinion, performance is pretty weak. On 5S and 9T it had approx 2000RPM headpseed and excellent performance. However, this is pushing the motor to hard. It exceeded 200F in just a couple of minutes. I have no doubts that this will be a good motor in many airplane applications, but it isn't a good match for the Swift.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this motor in a 500 size helicopter, very powerful and quiet, highly recommended.



Just remember to have good ventilation !
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.