Motor Size: 2838
Max Load: 22A
Max volts: 14.8v 2s~4s
Max Watts: 300w
Front Mounting Hole Distance: 16mm or 19mm
Front Mount Thread Size: 16mm M2.5 / 19mm M3.0
Shaft Diameter: 3.17mm
Shaft Length: 12mm
Can Size: 380
Plug type: 3mm Bullet-connector
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Only just bought this motor to stick in a small boat on 2200 3 cell didn,t last 10 minutes before going up in smoke waste of money for meSmall motor leads. Dont use more that a 30/40a ESC of you risk burning her upIdeal zum Aufr*sten eines MPX Easy Star 1 mit Luftschraube 5,5 x 4,5. Mit 2S, Strom 16A und Anf*ngertauglich. Zieht besser als der Original B*rstenmotor. Mit 3S, Strom 24A geht er senkrecht hier kommt Spass auf.I bought this motor and i am disapointed. I tried many different props from 4.1x4.1 to 6x.4 at 3s. The max load of 22A is rediculus! Even at 25A a got only 400gr of static thrust with a TGS 4.5x4.5. Do not try bigger prop because the Amperes go high and you will burn the motor. In my opinio this motor is heavy and inefficient.I got this to place in a Multiplex Easystar and was very well amazed on how balanced and smooth it runs, a great product at the price point and for sure something I recommend. My only concern is the stiff tiny leads out the bottom of the motor, but hey...no big deal.
Shaft requires a 3.175 collet if using this for a prop, be sure to get the correct size, a 3mm will not fit!best inrunner for your money, good for 1:10 cars little boats with 2-3s 32props. or micro speedflyer with 5,2x5,2prop..2-3s is good 4s is to highAgain bough this motor very great full power output with low consumption and low temp thank hobby kingLittle pieerhouse!!
I used it as a replacement motor in an Aquacraft mini-alligator.
It becomes some sort of howling water-missile when combined with a carbon 5.5x5.5. On 3s Doesn't run hot.This motor came into a much bigger size box than it's size. Very well finish and smooth bearing. But no prop adapter or mounting screw.great motor, used it as a replacement for my funjet (original motor was from a stryker F27C) - very nice unit