Country
United States
 
Shipped From:

S3650-3300 Brushless Inrunner 3300kv (15.5T)

S3650-3300 Brushless Inrunner 33...

Motor Size: 3650
RPM/V: 3300kv (15.5T)
Max Load: 59A
Max Volts: 14.8 2~4s
Max Watts: 750
Resistance: 0.0129

Diameter: 36mm
Front Mounting Hole Distance: 25mm
Front Mount Thread Size: M3.0
Shaf...
S3650-3300

Now save save $0.00 $0

$28.45
OUT OF STOCK
290g
S3650-3300

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Overview

Motor Size: 3650
RPM/V: 3300kv (15.5T)
Max Load: 59A
Max Volts: 14.8 2~4s
Max Watts: 750
Resistance: 0.0129

Diameter: 36mm
Front Mounting Hole Distance: 25mm
Front Mount Thread Size: M3.0
Shaft Diameter: 5mm
Shaft Length: 16mm
Can Size: 540
Plug type: 4mm Bullet-connector
Weight: 222g

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    S3650-3300
  • Weight(g)
    290.00
  • Length:
    140.00
  • Width:
    55.00
  • Height
    55.00
  • Kv(rpm/v)
    3300.00
  • Max Currents (A):
    59.00
  • Power (W):
    800.00
  • Length B (mm)
    50.00
  • Can Length D(mm)
    50.00
  • Max Voltage(V):
    14.00
  • Shaft A(mm):
    5.00
  • Unit Weight (g)
    222
  • Diameter C(mm)
    36.00
  • Total Length E(mm):
    66.00
  • Resistance (mh):
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Comprei o motor, ele foi usado apenas duas cargas de bateria, digamos que algo entre 45 e 60 minutos, para minha surpresa, o rolamento frontal dele se desmontou, suas esferas foram atradas pelo m e prensadas contra os fios do enrolamento partindo vrios desses fios... Alem disso, apesar de ele indicar uma potencia de 750wts, perde feio em potencia para um clone dos EZ-run (3600Kv).
Vantagens: eixo 5mm, pinhes fceis de encontrar ( no Brasil) desvantagens: rolamento de qualidade duvidosa, potencia mediana.
S recomendo para on-road, onde dificilmente ter sujeira ou algo do tipo para detonar rolamentos, e em geral so modelos mais leves.
Ps.: montado em um DST/DBX convertido.
Fantastic item. I use them all the time. In planes, in quadcopters, in cars, in boats - you name it. Nice durable motor.
Use this in my Tamiya DT-02 buggy. Drilled out sprocket to fit 5mm shaft. Very good power and good quality.
hammer motor,hammer preis
Espero que de certo em uma stampede!
Otimo produto! Recomendo a compra!
This motor is amazing. I installed it on the stock Trooper and got excellent results. The model has become much faster. She started jumping even on a small hill, and under hard acceleration the front part off the ground. All this on the battery Lipo 3S. Of the small negative - the motor is heated to 50-60 degrees, but it may not affect anything.From ESC to 60A and more will be just fine.
i,m planning too use this engine in a 70cm deep v hull with a 120a esc
And 2 5000 mah 2s 30c lipo's. Will this engine survive?
UWAGA niskiej jakoi oyska naleao by je wymieni na dobrej jakoci , oyska zatary mi i po 30 minutach pracy
I bought this motor to use on a 4wd hpi mt2. It is a 2 pole motor with a 5mm shaft and a low kv rating. Overall appearance is good. I used it with a 2s set up. With a 16t pinion the motor got warm. Speeds were around 28mph. I would only recommend this motor for someone that has a 2wd car and is looking for better speeds over a stock motor.
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Ball bearing FAIL! download now [2606kb]

Combine

essential items and
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.