New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Sadler Vampire SV2 Glow Sport Model Balsa 1500mm (ARF)

Sadler Vampire SV2 Glow Sport Model Balsa 1500mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
SadlerVampire
WANT FREE SHIPPING? Click here to find out more!

The Sadler Vampire SV2 is a glow powered sport model for pilots looking for something different. The built-up balsa/ply wing and tail, along with a fiberglass fuselage make this a very light weight model for its class. Fly slow, fly fast, do whatever you want.

The Vampire SV2 comes as a Almost Ready to Fly model. A few evenings of work installing your engine and electronics are all that is needed to get this model in the air. A pre-painted fuselage and pre-covering wings and tail speed up your build time. Add the complete hardware pack including fuel tank and wheels, and we have eliminated the need to run to the local model shop having to pick up all those extras.

Features:
• Almost Ready to Fly - Complete final assembly, install electronics and engine and Fly
• Pre-painted fiberglass fuselage
• Built up balsa and plywood wing, booms, and tail
• Tricycle landing gear with steerable nose wheel
• Wing/Tail come pre-covered in vibrant color scheme
• Complete hardware package

Specs:
Wingspan: 1500mm
Length: 1200mm
Flying Weight: 2400g
Wing Area: 39 dm2

Required:
4CH Transmitter and Receiver
0.46 2-stroke Glow Engine
7 x Standard Servos
Receiver Battery
Misc Building Adhesives

  • SKU SadlerVampire
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 4279.0000
  • Length 840.00
  • Width 250.00
  • Height 360.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

reçu la boite avec deux ailes gauche et pas de droite.....

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

reçu la boite avec deux ailes gauche et pas de droite.....

no directions at all, had a hard time with the plastic bolts and screws as they were not round more of an egg shape so they were garbage, one of the landing gear was not plated and looks like heck so I threw them out and installed electric retracts. Hard for any person to build a plane with defective parts. The price at the time was good. using a 100amp esc 15amp ubc and a Turnigy 670kv at 14 volts to test with. The 90 amp esc that originally was going to use was a piece of junk and would kick out as soon after 1/2 throttle. we shall see what happens at flight testing.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

no directions at all, had a hard time with the plastic bolts and screws as they were not round more of an egg shape so they were garbage, one of the landing gear was not plated and looks like heck so I threw them out and installed electric retracts. Hard for any person to build a plane with defective parts. The price at the time was good. using a 100amp esc 15amp ubc and a Turnigy 670kv at 14 volts to test with. The 90 amp esc that originally was going to use was a piece of junk and would kick out as soon after 1/2 throttle. we shall see what happens at flight testing.

I just got this and I love the price. Of note is the landing gear rod lacking the end piece that prevents the landing wheel from coming off. The ones that with the kit are too small! I am putting a EMP C5055-700KV 1450W 3-8S 80A on this aircraft. Should push 122MPH.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just got this and I love the price. Of note is the landing gear rod lacking the end piece that prevents the landing wheel from coming off. The ones that with the kit are too small! I am putting a EMP C5055-700KV 1450W 3-8S 80A on this aircraft. Should push 122MPH.

nice looking plane and the directions are ok, But here is the flip side, DO NOT try to use the recommended servos as you will waste money just like I did. yes you need a full size servo for the ailerons which I am going to use 2 TGY 4409MD servos. The elevator and rudders are another thing. try using Corona DS238HV Digital Metal Gear will fit the pockets but remember your UBEC has to be set for 6 volts otherwise you may have difficulties running them. Do Not forget only use 2 TGY 4409MD for the ailerons DO NOT by all seven. I am also going to modify the wings to except retracts which after installing and testing I will let you know more. You buy a total of seven servos if you are building a gas model. I am doing electric and most likely 18.5 volts to start.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice looking plane and the directions are ok, But here is the flip side, DO NOT try to use the recommended servos as you will waste money just like I did. yes you need a full size servo for the ailerons which I am going to use 2 TGY 4409MD servos. The elevator and rudders are another thing. try using Corona DS238HV Digital Metal Gear will fit the pockets but remember your UBEC has to be set for 6 volts otherwise you may have difficulties running them. Do Not forget only use 2 TGY 4409MD for the ailerons DO NOT by all seven. I am also going to modify the wings to except retracts which after installing and testing I will let you know more. You buy a total of seven servos if you are building a gas model. I am doing electric and most likely 18.5 volts to start.

Bought this as listed for a 46 engine. The FUS is for an electric version. not GLOW, the firewall is a motor mount for a 50 sized electric motor, goes together very easily and there is plenty of room for batteries. You need a higher KV motor to give you a choice of smaller props to fit between the tail beams .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this as listed for a 46 engine. The FUS is for an electric version. not GLOW, the firewall is a motor mount for a 50 sized electric motor, goes together very easily and there is plenty of room for batteries. You need a higher KV motor to give you a choice of smaller props to fit between the tail beams .

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save