Sanwa M12 Surface Radio System 40th anniversary Version w/RX-471, RX-471 Dual-ID, RX-472

To celebrate their 40th Anniversary, Japanese manufacturer Sanwa introduce a special edition of the M12 Radio. Coming in a special piano lacquer design, with an Aluminium engraved serial number plate and new offset steering wheel, the radio highly differs from the standard M12. This radio set come with a total of three receivers including a RX-471, RX-472 and a RX-471 Dual-ID Version.

Features:
• 4-Channel 2.4GHz FHSS-4T Digital High-Response Computer Radio with Advanced Programming
• Includes RX-471 2.4GHz FHSS-4T Super Response Receiver
• Includes RX-471 Dual-ID 2.4GHz FHSS-4T Super Response Receiver
• Includes RX-472 2.4GHz FH4T Super Response Receiver w/Sanwa Synchronized Link (SSL) Support
• Special piano lacquer design with an Aluminium engraved serial number plate and new offset steering wheel
• Large LCD Screen Features STATUS screen, ASSIGN screen and TELEMETRY screen
• High-Power FHSS-4T Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance
• Accepts Optional Ni-Cd or Ni-MH Batteries or 2S Li-Po or 2S Li-Fe/A123 Battery Packs
• 50 Model Memory
• Telemetry Logging and Servo Monitor
• Steering, Throttle and Brake Dual Rate
• End Point Adjustment
• Exponential, ARC and Curve Adjustments
• Servo Speed Adjustment
• Anti-Lock Braking
• Throttle Offset
• Throttle Hold
• Lap Timer and Two Interval Timers
• Large, Easy-to-Read Lap timer Display
• Two Compensation Mixing
• Normal, SSR and SHR Servo Modes
• Center or Parallel Trim Types
• Programmable Fail Safe
• Digital Trims
• Servo Sub-Trim
• Programmable Push-Button Switches, Trim Switches, Lever and Dial
• Adjustable Steering and Throttle Channel Response Time
• 10 car Type Templates Including 3 Crawler Setups
• User-Selectable Start-Up Screen
• PC-Link Allows PC-Connectivity Using Mini USB cable
• Receiver Safety Link
• Five Racing Modes Allow Setup Changes on the Fly While Driving
• Selectable Modulation Type
• Configurable Vibration Alarms and Timers
• Digital Battery Voltage Monitor
• Adjust for Right-Handed or Left-Handed Use

Transmitter Specs:
Output Power: 100mW
Nominal Input Voltage: 4.8~7.4V
Operating Voltage Range: 4.0~9.6V
Dry Weight: 590g
Frequency: 2.4GHz FHSS
Modulation Type: FH2, FH3, FH3F, FH4T, FH4FT

Receiver Specs (RX-471):
Nominal Input Voltage: 4.8~7.4V
Weight: 6.6g
Dimensions: 30x23.3x14mm
Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter
Fail Safe Support: Yes (All Channels)
Battery Voltage Fail Safe Limit: 3.5~7.4V (FH4) / 3.5~5.0V (FH3)
Dual-ID Version: Able to bind with 2 Transmitter for 1 receiver.

Receiver Specs (RX-472):
Nominal Input Voltage: 4.8~7.4V
Weight: 6.6g
Dimensions: 30x23.3x14mm
Frequency: 2.4GHz FH3/FH4 Selectable Via Transmitter
Fail Safe Support: Yes (All Channels)
Battery Voltage Fail Safe Limit: 3.5~7.4V (FH4) / 3.5~5.0V (FH3)
SSL Function Sytem: For Super Vortex Zero ESC

Included:
M12 FH4T Digital High-Response Telemetry Transmitter
RX-471 Super Response Receiver
RX-471 Dual-ID Super Response Receiver
RX-472 Super Response Receiver w/SSL support
On/Off Switch
Receiver Battery Holder
Optional Grips (Large and Small)
Optional Steering wheel Angle Plates (Right and Left)
Optional Aluminium Steering Wheel Offset Plate
Optional Steering Wheel Springs (Soft and Hard)
Optional Throttle Trigger Angle Brackets (Thin and Thick)
Receiver Dust Boot Covers
User's Guide

Required:
4 'AA' Alkaline or NiCd/NiMH cells or 2S LiPoly or 2S LiFe Battery Pack for Transmitter

*Note: Please be aware that analog servo could not be activated under SHR,SSR mode. To prevent risks of trouble, do not use analog servo under SHR,SSR mode.
SSR mode only activates on SRG series.
The Sanwa M12 can be operated with all Sanwa 2.4GHz FHSS-2, FHSS-3 and FHSS-4 car receivers.