New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Servo Splitter Lead 1 Female to 8 male

Servo Splitter Lead 1 Female to 8 male

Discontinued Product

Please continue searching for a similar product.
SKU:
260000013-0
WANT FREE SHIPPING? Click here to find out more!

This handy little accessory will allow you to easily split a single receiver channel output into 8.

A great accessory for those building multirotors as it gives you an easy way to program the throttle range into your ESC's all together prior to fitting them to your frame.

It can also be used as a splitter in LED lighting systems or any other application where up to 8 servos are all performing the same function.

Specs:
Lead length: 90mm
Weight: 6g

  • SKU 260000013-0
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 14.0000
  • Length 95.00
  • Width 25.00
  • Height 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Weighs 5.9g in total. Distance between the connectors is very narrow, so if you pack it full, the last few ones will be a bit tricky to get connected. Would have been better with just a few tenths of a millimeter wider, but oh well. "Box" is 18 x 32.3 x 7.4 mm. Visible part of the cable is 90mm. Cable out from the box has a good stress relief. Unscrewed the four screws that hold the board to the box to check the solderings, and they were all fine (three soldering points had been improved, shows that some care actually was taken making this thing). Not the thickest servo wire, so if you are going to pull serious current might want to increase AWG. Bought it for servo testing, and for that it will do nicely. Deducted one star for the very tight fit when you use all connectors, but it's still recommendable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Weighs 5.9g in total. Distance between the connectors is very narrow, so if you pack it full, the last few ones will be a bit tricky to get connected. Would have been better with just a few tenths of a millimeter wider, but oh well. "Box" is 18 x 32.3 x 7.4 mm. Visible part of the cable is 90mm. Cable out from the box has a good stress relief. Unscrewed the four screws that hold the board to the box to check the solderings, and they were all fine (three soldering points had been improved, shows that some care actually was taken making this thing). Not the thickest servo wire, so if you are going to pull serious current might want to increase AWG. Bought it for servo testing, and for that it will do nicely. Deducted one star for the very tight fit when you use all connectors, but it's still recommendable.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!