Sky Easy Glider 2.4G 4Ch 1050mm RTF (mode 2)

Sky Easy Glider 2.4G 4Ch 1050mm RTF (mode 2)
Awesome!
Copy and Share the Below URL
Accessories
Looking for something that is easy to assemble, crash resistant, yet a blast to fly? Then Sky Easy Glider is for you!
Made out of tough EPO foam to handle those little incidents that are part and parcel with learning to fly R/C, the Sky Easy Glider is a great beginner’s model.
Featuring a pre-installed Motor, ESC and servos, which make setting her up out of the box a very straight forward process that won't take more than 15-20 minutes, a comprehensive instruction manual is included. It even comes with a screwdriver and a spare propeller!
Included with this model is a 4 channel 2.4ghz radio, a 1000mah 2s Lipo and a basic Lipo charger - that's everything you need to go flying apart from 4 AA batteries and glue!
The Sky Easy Glider has motor, elevator, rudder and aileron controls for great manoeuvrability, whilst the beginner friendly poly-dihedral wing enhances the models in-flight stability, ensuring new pilots enjoy successful flights.
A perfect gift for the budding R/C Pilot!
Spec:
Wing span: 1050mm
Length: 863mm
AUW: 370g
Motor: 2730 - 2000Kv (included)
ESC: 15amp (included)
Battery: 2s 1000mah 15c Lipo (included)
Radio: 4 channel 2.4 Ghz (Mode 2 - Throttle on the left) (included)
Servo: 1 x 8g; 2 x 6g (included)
Requires:
4 x AA Batteries
Note: The receiver is supplied inside the transmitter's battery compartment!
-
Capacity (mAh) 1.00
-
Sky Easy Glider 2.4G 4Ch 1050mm RTF
-
Sky Easy Glider
SkyEasy_Manual.pdf | Download [2796] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!