Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • USA

Snap-n-Fly 3 in 1 Micro Plane (Mode 2)

Snap-n-Fly 3 in 1 Micro Plane (Mode 2)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
1189 g
SKU:
Snap_Fly-M2
Product
Description
Snap-n-Fly comes with 3 ready to fly airplanes which are uniquely different! Each airplane has slightly different flying characteristics, but all three use the same base module!
The base module is held in magnetically, inside it is the receiver, ESC, motor, and servos. The servos magnetically snap to the control linkages. When you are done flying a plane, just simply "pop" the base module off, and remount it on one of the other planes! Change the preset mixing dial to the appropriate plane, and you are off!
This kit includes 3 built airplanes, batteries, propellers and a transmitter! Inside the transmitter is the battery charger for 2 lipo packs.Just required is 4 x AA batteries.

Specification:
Airplane model: Canard, Biplane, V-tail 
Wing Span: 340, 330, 350mm
Length: 260, 300, 280mm
Weight: 18, 18.5, 17.5g
 
Transmitter spec.
900MHz band 8-frequency selections (Mode 2) Throttle on the Left
4 proportional control channels
2 switch channels (Not used in this product)
6 mixing selections
Built-in dual-position single-cell Lipo battery charger
Power supply: 6V / 4 x AA batteries (Not included)

Receiver spec.
8 working frequencies in 900MHz band
4 proportional control channels
6 mixing selections
1 single-cell Lipo power supply
 
Included;
1 x Base module
1 x Canard plane module
1 x Biplane module
1 x V-tail plane module
3 x Lipo batteries
1 x Spare propeller h: 1 spare motor 
1 x Spare motor mount
1 x Transmitter
 
Due to distribution rights we cannot ship this product to North America.
Product
Specifications

Additional Information

  • SKU:
    Snap_Fly-M2
  • Brand:
    N/A
  • Weight(g)
    1189.00
  • Length
    615.00
  • Width:
    105.00
  • Height:
    390.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Can rechargable AA batteries be used in the transmitter to charge the little lipo battries or would they damage them?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Inside the transmitter is the battery charger for 2 lipo packs.Just required is 4 x AA batteries.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ijust resive the pack I could not find any charger for Li-po. May I miss something don't know. However product seems good.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [3282kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.