Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Super Surge Crusher 90A Twin-Hull R/C Boat (730mm) Plug-n-Drive

Super Surge Crusher 90A Twin-Hull R/C Boat (730mm) Plug-n-Drive

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
3379 g
SKU:
SuperSCrusher
Product
Description
A huge 90A 4563 size powerplant makes this a seriously fast boat!
Fiberglass hull, Huge 45 class brushless inrunner with watercooling and a 90A liquid cooled ESC. Direct drive to prop and low friction shaft system help put power to the water.
You will need a pair of 2S 4,400mAh LiPoly packs or a pair of x 3S 4,400mAh packs to run this boat at top speed.
 
Spec.
Length: 730mm (28.75in)
Beam: 210mm (8.25in)
Height: 55mm
Weight : 1500g
Motor: B4563 size Watercooled brusless 
ESC: 90A watercooled
Drive system: Direct drive
 
Required.
Radio System (2ch) & Receiver
2 x 4400mah 2S~3S 7.4v~11.1v 25C+ Lipo or higher

Included;
Super Surge Crusher fiberglass RTR boat
Spare prop
Tape
Hex key
Product
Specifications

Additional Information

  • SKU:
    SuperSCrusher
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    3379.00
  • Length:
    750.00
  • Width:
    157.00
  • Height
    255.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
purchased 2 off these and both were broken on arrival emailed HK and was told there would be replacements parts sent out and every month im told by the end off the month and now its going on 4 months and still no replacement parts and i am disgusted as i am still told the parts are on the way.. after spending $600 dollars i thought i would get better service from HK. wasnt i wrong 2 boats sitting here and not going for months thanks for nothing HK hope you have a merry Xmas
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
attention j'ai un ami du meme club modelisme que moi qui l'a achete le gel coat est craque au niveau du support moteur et on vois le jour a travers la coque est a renforcer absolument sinon ???

sinon il marche pas mal l'helice 3 pales est fragile a voir pour la remplacer par une 2 pales DD mais attention c'est du M 5 et non pas 4,7
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good boat. Electronic and motor are both good quality but I suggest to try with at least 2X3S 3300 or 4000 mah 30-40C. My first run was with turnigy 3S 4000 mah 20C and one the lipo was burned at the end. I think because of a strong 90A ESC, you need at least 30C while running on 4000mah and 40C with 3300mah.Have a look to my video (not a the max power) http://www.youtube.com/watch?v=LjXtpnM3dBA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i purchased 2 super surge crushers and got them today!...both motors and engine mounts had broken off both boats.where 1 broke off it had cracked the hull and gel-coat and could see daylight straight through it..the other boat had bad cracks were it had broken off aswell! spoke to HK and sent them emails with photo's just hope they do something because as it stands i have 2 off these that are useless..my first purchase with HK doesnt look good
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received boat, put 2 two cell packs in and after 2 minutes flames came out of the boat due to the poor esc soldering internally. replied to hobbyking about the bad esc which ruined my day with friends and also stated that i have pictures of the burned esc and there reply was for me to ship the item back as if it was my fault the connections were bad after 2 minutes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received boat, put 2 two cell packs in and after 2 minutes flames came out of the boat due to the poor esc soldering internally. replied to hobbyking about the bad esc which ruined my day with friends and also stated that i have pictures of the burned esc and there reply was for me to ship the item back as if it was my fault the connections were bad after 2 minutes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
CE BATEAU NESSESSITE 2 LIPO 3s 11.1V EN SERIE



THIS BOAT REQUIER 2 3s LIPO 11.1V IN SERIE
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.