New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

T5682 Turnigy Pro Comp Brushless Inrunner Motor 1700kv

T5682 Turnigy Pro Comp Brushless Inrunner Motor 1700kv

Discontinued Product

Please continue searching for a similar product.
Weight:
992 g
SKU:
T5650-1700
WANT FREE SHIPPING? Click here to find out more!

When you need serious power for your large scale perfomance boat or 1/5 scale RC car, look no further than the Turnigy Pro Comp series inrunners. These superbly engineered motors offer high quality, ultra high performance & reliability. The motor is re-buildable and features removable end caps, the motor shaft has a machined flat and is 8mm in diameter to handle the extreme torque produced by this monster of a motor!

Specs:
Size: 56x82mm
Kv: 1700rpm/v
Lipoly Cells: 6s
Max Efficiency: 4800w
Current at Max Efficiency: 180A
Max Current (10s): 265A
No Load Current: 4.4A
Internal Resistance: 0.0038
Shaft: 8mm
Weight: 690g

  • SKU T5650-1700
  • Brand -
  • Shipping Weight(g) 992.00
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 1700.00
  • Max Current (A) 265.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 25.00
  • Power (W) 4800.00
  • Shaft A(mm) 8.00
  • Length B (mm) 82.00
  • Diameter C(mm) 56.00
  • Can Length D(mm) 74.00
  • Total Length E(mm) 106.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...

This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.

Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.

Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?

Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!

Customer files
5682 Motor mount Download [53]
5682 Motor mount Download [62]
vanquish2 Download [907]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!