Tarot 250mm Mini Through The Machine Quadcopter with PCB
When it comes to Tarot you know that quality is their main focus. This 250mm H Style frame has a lot of performance in its design and a simple process to build. The chassis is made from 2.1mm pure carbon with a fully integrated PCB on the lower deck. This can be setup to be directly soldered for ESC, FPV, GPS and the Flight controller to give you that slick and clean wiring setup, complete with XT60 soldered into the frame.
The skid style landing gear is very strong and one of the strongest we have seen to date. Up front is a mounting plate to attach your FPV camera. All this into a super lightweight frame (116g).
• High Quality Frame
• H Style frame for better hi-speed stability performance
• 2.1mm Pure carbon
• Strong Landing Gear
• Integrated PCB
Wheelbase : 250mm
Weight : 116g
Height : 48mm
4 x Motors 1506~2204
1 x Battery 800~1500mah 7.4~11.1V (2 or 3 cells Lipoly)
4 x Propellers up to 5in
4 x ESC’s 7~12A
1 x multi-rotor Flight controller
4ch radio (6ch recommended for FPV and FC use)
FPV gear (optional)
The build is very good but the package come with the faulty and missing top metal bar. I will find a CNC service or 3d printing to clone the part instead of waiting for long delivery time singpost or taxable fedex.
Nice little machine one it is put together. Hardware is not M3, M3 is what everything else is made of so its kind of annoying. Some holes don't line up and not really any space between plates to install electronics. For DYI'ers like myself with a 3D printer these faults don't matter and this turns out to be a very robust package to build an awesome flyer. I bought the OSD from another site.Frame ini bagus, beda dari frame-frame 250 lainnya. Frame ini juga kuat, landing skid model helikopter membuat nya lebih kuat saat hard landing atau crash. PCB boardnya memudahkan merangkainya dan membuat kabel-kabel esc tidak berantakan. Saya memberi bintang 4 karena pada waktu order tarot mini ini terdapat goresan pada pcb boardnya. terima kasih :)Nice carbon fiber quality, nice size, BUT!!!!! the kit came incomplete, one of the aluminum frame structural parts was not in the box, and 4 screws were impossible to tight because the threads were bigger, none of the screws worked in that. I don't know whose mistake is this, but they have to figure it out.Nice little frame. Tough, thick, true carbon fiber. I love the built in XT60. The only thing is the built in PCB, unless you plan to run a CC3D flight controller and tarot OSD its useless except for the Motor/ESC connections.It doesn't matter how much you paid for a particular product. You would expect it to come complete and actually work out of the box.
The particular package that I received had:
1) missing holes on the frame.
2) missing screws
3) missing parts (such as the top metal piece that the screws go into to secure the wing arm, top board and PDB)
NVM that the product has typos in the manual. But for it to come with missing parts?
This is a nice frame. Very rigid and the landing gear does a good job of protecting the electronics if you put everything underneath. Mine has been flown though a few trees and so far I have only cracked the CF on one arm. The only issue is the lack of protection for the camera and I can't find parts.