New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

TGY AerodriveXp SK Series 28-26 1350Kv / 260W

TGY AerodriveXp SK Series 28-26 1350Kv / 260W

Discontinued Product

Please continue searching for a similar product.
SKU:
SK-2826-1350
WANT FREE SHIPPING? Click here to find out more!
TURNIGY AerodriveXp SK Series
AerodriveXP SK Series motors are designed for those who want the very best in outrunner technology for their R/C plane. Typically an efficiency improvement of around 8-10% can be seen over similar classed motors. This is in part due to the following;
Stator Laminations: .2mm
Magnet Type: N45SH
Bearings: Dual oversize (Japanese) 
 
Model: SK28-26 1350
Kv: 1350rpm/v
Turns: 11
Resistance: 134m-ohm
Idle Current: 0.7
Shaft: 3.175mm
Weight: 53g
Rated Power: 260W
ESC: 22A+
Cell count: 2-4
Suggested Prop: 8x3.8

*Includes mount and prop adapter accessories (not shown)
  • SKU SK-2826-1350
  • Brand -
  • Shipping Weight 83.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
  • Kv(rpm/v) 1350.00
  • Max Current (A) 0.00
  • Resistance (mh) 134.00
  • Max Voltage(V) 14.00
  • Power (W) 260.00
  • Shaft A(mm) 3.00
  • Length B (mm) 28.00
  • Diameter C(mm) 28.00
  • Can Length D(mm) 16.00
  • Total Length E(mm) 41.00
  • TGY AerodriveXp SK Series 28-26 1350Kv / 260W
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this in a robotic application, and as a motor, it's holding up fine. My biggest issue is with the wire leads provided from the motor. All three have broken inside the insulation. I finally snipped all three to very near the motor, and soldered on my own high strand-count wire.

But, as far as motor performance goes, I'm pretty happy. It's torquey, it spins fairly smooth, and it handles what I want it to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this in a robotic application, and as a motor, it's holding up fine. My biggest issue is with the wire leads provided from the motor. All three have broken inside the insulation. I finally snipped all three to very near the motor, and soldered on my own high strand-count wire.

But, as far as motor performance goes, I'm pretty happy. It's torquey, it spins fairly smooth, and it handles what I want it to.

Produit de tres bonne qualite, je ne regrette pas

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Produit de tres bonne qualite, je ne regrette pas

The specs are very overstated, the motor barely handles half of rated power with acceptable overheating. It needs internal resistance twice as lower for reliable 20 A operation.
2 stars for perfect machining.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The specs are very overstated, the motor barely handles half of rated power with acceptable overheating. It needs internal resistance twice as lower for reliable 20 A operation.
2 stars for perfect machining.

Installed in 950 cm boat, twin prop with 35mm 3 blade props as upgrade to 2217 1050KV motor. Both motors cooked windings after only 3 minutes of running at 12 volts. Blew out receiver and both ESC's so very expensive. Avoid avoid avoid!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed in 950 cm boat, twin prop with 35mm 3 blade props as upgrade to 2217 1050KV motor. Both motors cooked windings after only 3 minutes of running at 12 volts. Blew out receiver and both ESC's so very expensive. Avoid avoid avoid!

high quality motor with lots of power that fits perfect in my Robbe Arcus and Parabolic gliders

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality motor with lots of power that fits perfect in my Robbe Arcus and Parabolic gliders

Small motor with lots of power. Tested using 8x4 props and it doesn't get hot! Its a little rough on the turning, but thats because of the strong magnet!! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small motor with lots of power. Tested using 8x4 props and it doesn't get hot! Its a little rough on the turning, but thats because of the strong magnet!! :)

Hi folks. I think this motor is a very good one.. becouse me and many of my friends are using it on there planes and havent have any problems with them. my self using to of these engines on a great planes catalina pby with to of 25 amp mysteri esc and to 3 blade master airscrew 8x6. i have 18.5 amps and 205 watts on full trottle on each engine and with full trottle in about then seconds i have about 48c in temerature. so overall think this is a reliable engine but i dont think this engine is good for 260 watts as bescribed... therfore four stars.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi folks. I think this motor is a very good one.. becouse me and many of my friends are using it on there planes and havent have any problems with them. my self using to of these engines on a great planes catalina pby with to of 25 amp mysteri esc and to 3 blade master airscrew 8x6. i have 18.5 amps and 205 watts on full trottle on each engine and with full trottle in about then seconds i have about 48c in temerature. so overall think this is a reliable engine but i dont think this engine is good for 260 watts as bescribed... therfore four stars.

Very good engines.. Using to of these in a great planes catalina and they goes exsacly alike with mystery 25 amp esc...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good engines.. Using to of these in a great planes catalina and they goes exsacly alike with mystery 25 amp esc...

idealni pro stihacku aircombat

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

idealni pro stihacku aircombat

Got this for my Sky Arrow R/C Airplane Kit as an option to a 1000Kv motor. On this plane there is limited propeller space and higher Kv is needed. Good motors with Hong Kong bearings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this for my Sky Arrow R/C Airplane Kit as an option to a 1000Kv motor. On this plane there is limited propeller space and higher Kv is needed. Good motors with Hong Kong bearings.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!