ToolkitRC MC8 1~8S Advanced Multifunction Battery Checker
ToolkitRC MC8 1~8S Advanced Multifunction Battery Checker
Awesome!
Copy and Share the Below URL
Accessories
The ToolkitRC MC8 Advanced Multifunction Battery Checker is packed full of features and has a large color screen for complete battery status at a glance. This multifunctional checker can check the status of 1 cell, to 8-cell battery packs, has one-touch battery balancing, and can read output signals for PWM, PPM, or SBUS, as a receiver checker. The PWM output can also be used as a servo tester, and the MC8 can even fast charge your mobile devices via its USB-C 20W output port.
The MC8's menus are easy to navigate using the high-quality, metal UI scrolling control wheel. All the menus and setting parameters are clearly visible on the full color, wide angle, backlit, 2" 320x240 pixel LCD display.
The MC8 can handle an input voltage of anything from 7~35V via its built-in XT60 socket. The full list of ports includes a signal port (for servos, receivers, etc), a 2~8S balance port, USB-C (for fast charging, etc), and a USB-A (for firmware upgrades). The MC8 will measure and balance LiPo, LiHV, LiFe, and Li-ion battery packs and it also includes over-discharge protection.
This multifunction battery checker is a must for all modelers to keep in their toolbox for use at the flying field, race track, or boating lake. It is also perfect for the workshop for checking battery packs and setting up your RC equipment and servos.
Features:
• Perfect for checking at a glance the status of 1~8S battery packs
• Multifunction's include checking RC receivers and servos
• Supports input signals PWM/PPM/SBUS to an accuracy of 1ms
• Can fast charge mobile devices via its USB-C 20W output port
• Full color, wide angle, backlit, 2" 320x240 pixel LCD display.
• One-touch battery balancing
• Updateable firmware via USB-A port
Specs:
Type: ToolkitRC MC8 Advanced Multifunction Battery Checker
Input Voltage: 7~35V DC
Cell Count: 1~8S
Balance Input: 0.5~5V Lixx 2~8S
Balance Current: 60mA@2~8S max
Balance Accuracy: <0.005V@4.2V
Signal Support: PWM/PPM/SBUS
Signal Port Input: 6V
USB-A Output: 5V@1A firmware upgrade
USB-C Output: 5~12V@20W max
USB-C Protocol: PD3.0/QC3.0/AFC/SCP/FCP
LCD Display: Full color 2" 320x240 pixel LCD
Dimensions: 68x50x15mm
Weight: 50g
Please note: A copy of the user manual is available under the "Manuals/File" tab above.
ToolkitRC MC8 Advanced Multifunction Battery Checker User Manual | Download [1] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!