TrackStar performance now in comes in easy to select Combo package!
Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar 18A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. Combined with the quality 4 pole motor this translates in to very smooth start up and acceleration and torque.
The Turnigy TrackStar 18A ESC also boasts a host of programing options not usually found in an ESC of this size and can be programmed with ease via the Turnigy TrackStar programing card (sold separately)
Cont. Current: 18A
Burst Current: 25A
Car Size: 1/18th
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
L-BEC: 5V / 1A Output
Motor Type: Sensorless Brushless
Size: 30 x 26.1 x 13.8mm
Weight: 26g (Including wires)
Motor Plugs: 3.5mm Bullet type
Battery Plug: Required
On/Off Switch: Yes
KV value: 5050KV
Motor length: 37mm
Extend shaft diameter: 2mm
Length of extend shaft: 11±0.5mm
No loading @ 7.2V: 2.2A
Max current: 34A
Resistance (Ω): 0.027Ω
Battery range: 2~3s 7.4v~11.1v
Operation Temperature: 80°
Max Temperature 130°
Suitable car scale: 1/18
Suitable ESC: 25A
Thickness of lamination: 0.2X20mm
Great little power house, I have it hooked up to my 118B
over stock esc the performance is much better with smooth faster response and
with the option of programming.
On the box it tells me 25amp constant not 18 as per ad descriptionSlapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mmI put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!excellent combo ,I installed it on my xray m18, and it fits very well and runs excellentParfait pour mon CR 1/16This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.