Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Turnigy 1257TG Digital Titanium Gear Servo 57g/10.5kg/.09sec

Turnigy 1257TG Digital Titanium Gear Servo 57g/10.5kg/.09sec

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
162 g
SKU:
TGY-1257TG
Product
Description

*Perfect for use as cyclic servo for .50 ~ .90 size helicopter

Model: TGY-1257TG
Operating Voltage: 4.8V / 6.0V
Operating Current: 300mA / 400mA
Operating Speed: 0.10sec.60º/ 0.09sec.60º
Stall Torque: 9.0kg.cm /10.5kg.cm
Size: 40.3X20.2X37.2mm
Weight: 57g
Dead Band: ≤2uSec
Motor: Coreless Type
Ball bearing: 2BB
Gear: Titanium
Connector wire: 300mm
Plug: JR Type
Operating Temperature Range: -20c+60c

Product
Specifications

Additional Information

  • SKU:
    TGY-1257TG
  • Brand:
    N/A
  • Shipping Weight(g)
    162.00
  • Length
    114.00
  • Width:
    31.00
  • Height:
    76.00
  • Unit Weight (g)
    57
  • Torque(kg)(min. 0.01kg)
    10.50
  • Speed (Sec/60deg):
    0.09
  • A(mm):
    41.00
  • B(mm)
    40.00
  • C(mm)
    38.00
  • D(mm):
    20.00
  • E(mm):
    55.00
  • F(mm)
    25.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This servo seems very well built with impressive speed, centring and resolution. I haven't run it long enough to warrant a full review but so far it looks promising. A great alternative to any Savox or Hitec high-speed servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought a shedload of these, have them in my Seagull Yak, one of the elevator servos died on the ground. They however do center well, and are very fast on 6.6v LiFE.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe das Servo bei einem Mugen MRX-4 X auf der Lenkung verbaut und es macht dort sehr Gute arbeit,

habe das Servo ein Ganzes Jahr gefahren ohne Probleme.

ein TOP Servo zum guten Preis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Das ist ein Top Servo
ich habe es in einem Mugen MRX 5 verbaut
es macht in meinem Auto sehr gute arbeit
ohne Probleme
und werde es in meinem neuen Auto auch einsetzen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Another great product , runs fantastic with lots of power , quick . Love it . Runs cool and hasent let me down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich benutze sie als Taumelscheiben Servo in meinem Logo 550SE. Bis jetzt bin ich mit den Servos sehr zu frieden, haben fast kein Spiel und sind sehr stellgenau. Ausserdem haben sie mehr als genug Kraft und schnell sind sie auch noch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, i use these on my HK550GT and these servos are the best i ever had till now (for this price). I have used spacers for clearance (they are just a bit too long - F size) Will mount the same on my HK600GT heli for cyclic too. The servos are fast, strong, precise and not so loud. Will definitely buy more. Bye
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far I'm pretty impressed with these servos. They look well constructed and have a good length lead. I love the metal box they come in, very classy. The servo arms fit well with a firm push, so no slop there. All 3 ran on the bench for over half an hour at 30pcnt speed (using the CX-3X1000 program box). They are quiet and smooth. The servo was only luke warm after this. Deadband is excellent and so in centering. The speed test at 5.5 volts showed 0.086, so better than specs above. Just the tiniest bit of slop in the gears, but my Align servos have as much as this. So far I'm pretty convinced this is a clone of the Savox servo, and hence the number. Great value, so far. I'll update below as I progress further.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ciao



servo clone del SAVOX 1257tg

con la "piccola" differenza che costa la met...



forte, resistente, veloce



ottimo servo per elicotteri classe 550, 600 e forse anche 700



ciao ciao
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
By far these are the best servos I've ever bought here. I installed three of them in my TT X-50's swashplate.The response is fast enough to fly 3D, but not radically fast, so you can fly f3c too.
The servos I changed over were futaba 3050's. I keep these hk's in use.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
my ca30 download now [875kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.