-
Product
Description -
Spec.
Kv: 924rpm/v
Operating Current: 6A ~ 14A
Peak Current: 17A
Suggested prop: 11x5.5 E-prop
Suggested Battery: 1300~2200mAh 3S1P
Weight: 59g
Dimensions: 27.6 x 32mm
Shaft Size: 3.175mm
Kit includes full accessories, including gold bullet connectors, prop saver, mount, spare rubber rings, shrink tube and screws. -
Product
Specifications -
Additional Information
-
SKU:
TR2213/22
-
Brand:
N/A
-
Shipping Weight(g)
89.00
-
Length
0.00
-
Width:
0.00
-
Height:
0.00
-
Kv(rpm/v)
924.00
-
Max Currents (A)
17.00
-
Power (W):
0.00
-
Length B (mm):
32.00
-
Can Length D(mm)
17.00
-
Max Voltage(V)
11.00
-
Shaft A(mm):
3.00
-
Unit Weight (g):
59
-
Diameter C(mm)
28.00
-
Total Length E(mm)
47.00
-
Resistance (mh):
0.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
Low quality motor. I`ll not byt this one again.Very Good Motor - its Kva is suitablei have it in the yak fomy that you sell .the 1100 mil wing span .it is 650 grams with 1300 battre it is a lower kv than stated as i have to run 12-6 prop. with this setup it will hover but no go vertical away very happy with it but will change it to park480 for more pawer .but this is a very good motor thank youexcellent motor, full accesories includedI use this motor with a folding prop aeronaut 10x4. Around 11A on 3s. Very nice and smoth on a 2m compozite glider.Good Motor, not enough strong for my quadcopter.
But here you can find an analyse realised with 12*4,5 prop :
https://docs.google.com/spreadsheet/ccc?key=0AmfjudVgg_YzdHphSDVWNmJVUW1hQzRzNlZLSlpmc1E&hl=en_USGood motor for qadroopter.i buy it for my hexa not yet fly but i read god reviews for thisNice motor. I am using it to fly a wilga 2000. Getting 7000 rpm with the 8x6 3-blade prop and more then enough power. Flying more than 15 minutes on a 1300mah 3s 20C turnigy pack.kesinlikle kalitesiz bi motor . Daha pervane bile takmadan motor aniden alrken duruyor. deiik sesler geliyor. pervane takp umaya altmda motor yznden krm yaadm. aniden duruyor ve alrken ses geliyor. ok kt ok.... -
Upload
Videos -
Upload
Files