Turnigy 2610 EDF Outrunner 4000kv for 55/64mm

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 31, 2015

I used it with teh EDF 7 Blade 51 mm. The EDF needs some adjusments. The combo itself is "roaring".

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 11, 2012

Nicely finished and leightweight motor - kv is accurate and motor is very light but powerful - great for those edf models

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 19, 2010

This motor coupled with the HK 64mm EDF is perfect!

• Overall
• Quality
• Value

Customer Rated

Dec 08, 2010

Type your review here.
I use this in a pusher configuration with a 4-3 prop and 3 cell in a VQ Delta Rocket plane. It goes straight up it so must be over 150 watts WOT.

The motor does not get hot. Its is hanging out in the airstream. I used a Rhino 1350 30C. The prop speed is almost 100mph. The plane seems to fly about 80.

This is a pretty powerful motor for its size, and swings the 4-3 with ease on 3 cells.

• Overall
• Quality
• Value

Customer Rated

May 19, 2010

Don't get caught with the mounting of these units,the one I received has 2.5 mounting holes, very fustrating, This is a size I find hard to get,HK QA is pathetic.!

• Overall
• Quality
• Value

Customer Rated

May 12, 2010

Combined with blue EDF 64mm sold here gives:



21.5 amps 515g with 2200 3s1p20c battery.



Ran it WOT 30 seconds static on a 22 degree celcius day and it was warm to touch after turning it off for 10 seconds. Not bad at all - also motor weighs 53g and combined with the EDF set is about 77 - 82g depending on your impeller.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 27, 2010

I use this motor in my boat. Cooling solution is a must. Very good.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 17, 2010

light fast and very strong edf works well on 6 and 7 blade

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 10, 2010

windings look nice and tight and have epoxy to keep them in place.will test in fan later